DIY: GD Rear Disc Brake Conversion
#81
Jazz/fit gd specific rear disc brake assembly
Thank you so much for this information, however for wher im from, we have a varient of honda just that comes with rear disc from factory, dyou think that would bolt on to non disc variants like i have? Planning to do the conversion as well. Thank you
#82
make sure that for the rear the donet car has the same rear axel set up and you should be find
#83
Emergency brake cables
Where did you find the emergency brake cables? I looked on Rock Auto for the recommended Honda Acura Legend 1987 that is in the parts list from apexanimal. I assume this was where you got your info?
jim13p
jim13p
#84
https://www.fastbrakes.com/default.asp
#86
A better alternative exists now. You can use a FastBrakes parking brake cable adapters and use your factory cables. Not sure if they are listed on their Site. May need to call or email them.
https://www.fastbrakes.com/default.asp
https://www.fastbrakes.com/default.asp
#87
Well the parts I found where on amazon. Raybestos BC94043 and BC94044 professional grade parking brake cable. The same car is what is called out for the disc mod and much cheaper. Also the brake lines should be the same from this car for the Fit. The front calipers are the same from the 1987 Acura Legend 2 door base model as the 1997 so that being said it makes sense that the cables and hoses will be the same.
Jim13P
Jim13P
#88
Well the parts I found where on amazon. Raybestos BC94043 and BC94044 professional grade parking brake cable. The same car is what is called out for the disc mod and much cheaper. Also the brake lines should be the same from this car for the Fit. The front calipers are the same from the 1987 Acura Legend 2 door base model as the 1997 so that being said it makes sense that the cables and hoses will be the same.
Jim13P
Jim13P
Thread
Thread Starter
Forum
Replies
Last Post
apexanimal
Fit Suspension & Brake Modifications
99
04-12-2015 09:04 AM
Deivioncrx
Fit Suspension & Brake Modifications
1
01-09-2007 03:15 AM