Rear disc research
Thread Starter
|
New Member
Joined: Sep 2016
Posts: 3
From: Bothell, WA
Rear disc research
This is Mark from Scarebird. We worked with Apexanimal a while ago for the 2007-2008 models. It works well but the parking cables are a bugger. I picked up a 2013 rear axle for test fitment yesterday. After an afternoon we realized this will be a task.
We currently have 2 solutions:
1. Modifying a Nissan rotor to work with a modded earlier bracket. It uses the same Earlier Acura cables. It will use the same 1994-01 Integra caliper.
2. Use the Integra rotor with a Ford front caliper, this would be a race setup (no parking brake) but the cost would be quite cheap (under $300 total)
I am still looking at other options such as the JDM RS setup (if I can find a source for the rotors and caliper!). Input would be welcome here.
We currently have 2 solutions:
1. Modifying a Nissan rotor to work with a modded earlier bracket. It uses the same Earlier Acura cables. It will use the same 1994-01 Integra caliper.
2. Use the Integra rotor with a Ford front caliper, this would be a race setup (no parking brake) but the cost would be quite cheap (under $300 total)
I am still looking at other options such as the JDM RS setup (if I can find a source for the rotors and caliper!). Input would be welcome here.
Member
Joined: Jan 2019
Posts: 36
From: Fishers, IN
This is Mark from Scarebird. We worked with Apexanimal a while ago for the 2007-2008 models. It works well but the parking cables are a bugger. I picked up a 2013 rear axle for test fitment yesterday. After an afternoon we realized this will be a task.
We currently have 2 solutions:
1. Modifying a Nissan rotor to work with a modded earlier bracket. It uses the same Earlier Acura cables. It will use the same 1994-01 Integra caliper.
2. Use the Integra rotor with a Ford front caliper, this would be a race setup (no parking brake) but the cost would be quite cheap (under $300 total)
I am still looking at other options such as the JDM RS setup (if I can find a source for the rotors and caliper!). Input would be welcome here.
We currently have 2 solutions:
1. Modifying a Nissan rotor to work with a modded earlier bracket. It uses the same Earlier Acura cables. It will use the same 1994-01 Integra caliper.
2. Use the Integra rotor with a Ford front caliper, this would be a race setup (no parking brake) but the cost would be quite cheap (under $300 total)
I am still looking at other options such as the JDM RS setup (if I can find a source for the rotors and caliper!). Input would be welcome here.
Thread
Thread Starter
Forum
Replies
Last Post
ETFitRS
3rd Generation GK Specific Suspension & Brakes Sub-Forum
12
Jan 26, 2015 07:43 PM