Testing water on 3 Drive Throttle Controller for GE6-GE9
Joined: Sep 2009
Posts: 594
From: Houston
Since we got a few reports that ppl launched at their driveway on SP7 and caused some damage. We had to change the programming to make the kit back to normal mode everytime the engine is turned off.
Sincerely,
Panson
TWP
Joined: Sep 2009
Posts: 594
From: Houston
Bump for a great add-on to make your FIT more fun to drive.
We are competitive on quality, pricing, and service.
Contact me for more detail
Sincerely,
Panson
TWP

We are competitive on quality, pricing, and service.
Contact me for more detail
Sincerely,
Panson
TWP
I'm hearing two stories it does and doesn't??
.
Joined: Sep 2009
Posts: 594
From: Houston
To make it clear, the new kit (reprogrammed) will revert back to normal after turning off the engine because of safety concern.
We do get complaint reports (almost going to court for ppl launching at their driveway and nearly hit somebody)
Sincerely,
Panson
TWP
We do get complaint reports (almost going to court for ppl launching at their driveway and nearly hit somebody)
Sincerely,
Panson
TWP
I know for mine it stays on the setting I last set it at. Its always on "SP3" for me and it nevers goes back to "Nor" unless I push it. I don't know about other units but I can confirm mine does.
Last edited by ekonetics; Mar 7, 2010 at 04:06 PM.
One advantage to having the controller return to the normal position is when you allow someone to drive your car when you aren't in it, they will be less tempted to get crazy with it .... Just tell them it is part of the cars security system and to be sure not to mess with it
It is a setting you can setup on it. At least that is how the Pivot one is. You can program to have it go to Normal or stay at the SP4 or > when the car is turned off, if it is SP3 or < it stays put.
Is yours not the same twpanson?
Is yours not the same twpanson?
Joined: Sep 2009
Posts: 594
From: Houston
We used to have the kit retain the setting once engine being turned off no matter which setting you were in.
However, to prevent any unwanted damage or tragedy caused by unfamiliarity of our products, we have changed the programming on the kit after February 2010 to make the kit go back to normal mode permanently (after shutting off the engine).
Hope this would clarify the confusion on our kit.
Sincerely,
Panson
TWP
However, to prevent any unwanted damage or tragedy caused by unfamiliarity of our products, we have changed the programming on the kit after February 2010 to make the kit go back to normal mode permanently (after shutting off the engine).
Hope this would clarify the confusion on our kit.
Sincerely,
Panson
TWP
Last edited by twpanson; Mar 8, 2010 at 02:20 PM.
Joined: Sep 2009
Posts: 594
From: Houston



