Official fit meet in wa.

Thread Tools
 
Search this Thread
 
  #441  
Old 04-06-2009, 04:04 PM
SpokanejdmGD3's Avatar
Member
5 Year Member
iTrader: (3)
Join Date: Nov 2007
Location: Spokane, Washington
Posts: 790
Originally Posted by scorpmatt
yeah well, a meet up south of the area when there is nasty roadwork on i5 also led to other issues.

We would of had to of been there by 11ish had we wanted "good" parking. The downside to this would of been, 1, me probably crashing due to lack of sleep; 2, not being able to leave until much, much later in the afternoon; 3, being surrounded by more ricers than i care to shake anyone's schtick at.

Some pictures are not worth the risk.
Werd. I'da left just as quick simply cause of that reason. HT isn't worth having to wait around that long. This is not the only group I know of that were dissappointed at HT this year. I'm glad I didn't go.


On another note I think the guys that did not go but still met up have done a damn good job of repping the PNW fits. They meet up all the time from what I see. I am usually bumbed b/c I live so far away and can't make them enough so I think you, Big Kidd, are being alittle over critical. Take it easy and just remember when it comes down to it, all this was is another HT meet. Whooptie Doo


On another nother note Joe's (JPAX's) Fit is shex! I wish I could drive it again.
 
  #442  
Old 04-06-2009, 04:38 PM
scorpmatt's Avatar
Member
5 Year Member
Join Date: Jan 2007
Location: Tacoma, Wa
Posts: 995
Originally Posted by SpokanejdmGD3
Werd. I'da left just as quick simply cause of that reason. HT isn't worth having to wait around that long. This is not the only group I know of that were dissappointed at HT this year. I'm glad I didn't go.


On another note I think the guys that did not go but still met up have done a damn good job of repping the PNW fits. They meet up all the time from what I see. I am usually bumbed b/c I live so far away and can't make them enough so I think you, Big Kidd, are being alittle over critical. Take it easy and just remember when it comes down to it, all this was is another HT meet. Whooptie Doo


On another nother note Joe's (JPAX's) Fit is shex! I wish I could drive it again.
Word mike, don't be too hard on the kidd, he still has some growing up to do.

I'm gonna try and see if the folks will let me do another bbq out at my place on the end of this month. What day/date, sat/sun is good for everyone? The 25/26 is the end of the month or we could carry it over to the 2/3 of may. Ideas? Thoughts? Comments? You know what to do, PM me or post em up here!
 
  #443  
Old 04-06-2009, 05:26 PM
SpokanejdmGD3's Avatar
Member
5 Year Member
iTrader: (3)
Join Date: Nov 2007
Location: Spokane, Washington
Posts: 790
I would like to make it to one of the meets so if I can plan on attending something like the weekend after Memorial day I could make that. That would be the weekend of the 29th.

Then again you all are always welcome to make the drive to Spokane land too.
 
  #444  
Old 04-06-2009, 05:36 PM
scorpmatt's Avatar
Member
5 Year Member
Join Date: Jan 2007
Location: Tacoma, Wa
Posts: 995
mike, so far my schedule for june is wide open. My other 2 car clubs have meets planned for may and august lol.

I'll get looking at the calendar here soon and maybe we can plan that far out a good sized meet, maybe a cruise + eat out/bbq.... maybe a day at a dyno... I dunno yet. I'd love to get all of the local fits together, by my last count we are up to 10 of us.
 
  #445  
Old 04-06-2009, 05:59 PM
SpokanejdmGD3's Avatar
Member
5 Year Member
iTrader: (3)
Join Date: Nov 2007
Location: Spokane, Washington
Posts: 790
I can set up the dyno day if you'd like. I usually have my annual Mitsubishi Mirage dyno day around June as it is anyway. I tried to incorporate the two forums last year but to no avail. I'd be down to try at it again this year.

There is a new 07 around here that is rolling around that has my eye. It looks to be lowered and has a Thule rack and looks very fresh. I'm trying to catch him on the road one of these days.
 
  #446  
Old 04-06-2009, 10:58 PM
ekonetics's Avatar
Member
5 Year Member
iTrader: (3)
Join Date: Nov 2008
Location: Renton,WA
Posts: 704
Has anyone heard of ISC coilovers? We should have a meet on Saturday so I can have Sunday to relax.
 
  #447  
Old 04-07-2009, 06:34 PM
scorpmatt's Avatar
Member
5 Year Member
Join Date: Jan 2007
Location: Tacoma, Wa
Posts: 995
well, if its a saturday then it'll have to be the 25th. Which is fine for me.

If i get a couple more yah's on the date, i'll get the folks to set everything up for a bbq.
 
  #448  
Old 04-08-2009, 01:06 PM
SpokanejdmGD3's Avatar
Member
5 Year Member
iTrader: (3)
Join Date: Nov 2007
Location: Spokane, Washington
Posts: 790
So...........................................Guess who bought SHG_Mike's one off hand made intake manifold today ?????????
 
  #449  
Old 04-08-2009, 01:24 PM
scorpmatt's Avatar
Member
5 Year Member
Join Date: Jan 2007
Location: Tacoma, Wa
Posts: 995
Originally Posted by SpokanejdmGD3
So...........................................Guess who bought SHG_Mike's one off hand made intake manifold today ?????????
someone with more money and interest to mod their fit than me?
 
  #450  
Old 04-08-2009, 02:26 PM
SpokanejdmGD3's Avatar
Member
5 Year Member
iTrader: (3)
Join Date: Nov 2007
Location: Spokane, Washington
Posts: 790
Originally Posted by scorpmatt
someone with more money and interest to mod their fit than me?

Meh, I just do what I can with what I have. Now I need dynoz time
 
  #451  
Old 04-08-2009, 03:50 PM
scorpmatt's Avatar
Member
5 Year Member
Join Date: Jan 2007
Location: Tacoma, Wa
Posts: 995
Originally Posted by SpokanejdmGD3
Meh, I just do what I can with what I have. Now I need dynoz time
you sound like me and the supra.
 
  #452  
Old 04-08-2009, 09:02 PM
kylerwho's Avatar
spoon fed
5 Year Member
Thread Starter
iTrader: (11)
Join Date: Apr 2008
Location: Seabattle, Washington
Posts: 5,234
i need to take a gander at that manifold so i can custom fab up one for my fit and replace the top part of te weapon r manifold..... i dont really like the boxy design and every one seems to have one.
 
  #453  
Old 04-08-2009, 09:10 PM
scorpmatt's Avatar
Member
5 Year Member
Join Date: Jan 2007
Location: Tacoma, Wa
Posts: 995
Ok, confirmed BBQ date for the 25th of april, those that need to, request the day off!
 
  #454  
Old 04-08-2009, 10:19 PM
SpokanejdmGD3's Avatar
Member
5 Year Member
iTrader: (3)
Join Date: Nov 2007
Location: Spokane, Washington
Posts: 790
Originally Posted by kylerwho
i need to take a gander at that manifold so i can custom fab up one for my fit and replace the top part of te weapon r manifold..... i dont really like the boxy design and every one seems to have one.
If you can make it out here before I make it over there you're welcome to stay at the house. I'm hoping to get the mirage guys out this way soon cause I have to install an ultimate on my buddys car soon.
 
  #455  
Old 04-08-2009, 10:51 PM
scorpmatt's Avatar
Member
5 Year Member
Join Date: Jan 2007
Location: Tacoma, Wa
Posts: 995
awh ****berries! I just found out that the 25th is a no go for me at all. Already had plans that I had forgotten about and they can't be changed. I could do it the 2nd but i'd have to be at a friend's place by 5... you guys want an early meet on the 5th and then ya'll can head out and do whatever in the evening?
 
  #456  
Old 04-09-2009, 10:35 AM
SpokanejdmGD3's Avatar
Member
5 Year Member
iTrader: (3)
Join Date: Nov 2007
Location: Spokane, Washington
Posts: 790
We never decided on the weekend after Memorial Day.
 
  #457  
Old 04-09-2009, 06:03 PM
scorpmatt's Avatar
Member
5 Year Member
Join Date: Jan 2007
Location: Tacoma, Wa
Posts: 995
the weekend after memorial day.... hrm, i dunno right now.
 
  #458  
Old 04-10-2009, 01:31 AM
ekonetics's Avatar
Member
5 Year Member
iTrader: (3)
Join Date: Nov 2008
Location: Renton,WA
Posts: 704
Lets wait for more people to respond so we can have more people at the meet.
 
  #459  
Old 04-10-2009, 04:20 AM
scorpmatt's Avatar
Member
5 Year Member
Join Date: Jan 2007
Location: Tacoma, Wa
Posts: 995
Originally Posted by ekonetics
Lets wait for more people to respond so we can have more people at the meet.
you wait for the people around here to respond and you'll end up with this:
Name:  071021_131840.jpg
Views: 50
Size:  145.0 KB

rain and all.
 
  #460  
Old 04-10-2009, 10:01 AM
SpokanejdmGD3's Avatar
Member
5 Year Member
iTrader: (3)
Join Date: Nov 2007
Location: Spokane, Washington
Posts: 790
Poor Matt. I remember that. That was right when I joined.
 


Quick Reply: Official fit meet in wa.



All times are GMT -4. The time now is 07:28 PM.