Unofficial Honda FIT Forums
Clipping in the clutch slave cylinder's hardline.. I should have done this before bolting it back on..
Clipping in the clutch slave cylinder's hardline.. I should have done this before bolting it back on..
0 2025/11/27 17:00:33
Torquing air cleaner bracket
Torquing air cleaner bracket
0 2025/11/27 17:00:30
Air cleaner bracket mounting down on two little bolts (you gotta zoom, as with most of these images
Air cleaner bracket mounting down on two little bolts (you gotta zoom, as with most of these images
0 2025/11/27 17:00:27
Pause to show all the stuff coming together.
Pause to show all the stuff coming together.
0 2025/11/27 17:00:24
Clipping the positive battery nonsense back onto the battery tray
Clipping the positive battery nonsense back onto the battery tray
0 2025/11/27 16:35:16
Clipping wires back on
Clipping wires back on
0 2025/11/27 16:35:14
Here's a shot showing the bolts on the underside of the battery tray
Here's a shot showing the bolts on the underside of the battery tray
0 2025/11/27 16:35:11
Battery tray going back on!
Battery tray going back on!
0 2025/11/27 16:35:08
Slave cylinder
Slave cylinder
0 2025/11/27 16:35:05
place
place
0 2025/11/27 16:35:02
place
place
0 2025/11/27 16:35:00
placeholder
placeholder
0 2025/11/27 16:34:56
The ball here could use an extra dab of urea grease.
The ball here could use an extra dab of urea grease.
0 2025/11/27 16:34:53
Working toward getting the slave cylinder actually installed
Working toward getting the slave cylinder actually installed
0 2025/11/27 16:34:50
Note the three raised bolts just left of center in this image. They're the mounting bolts for the shift linkage bracket. Now going back on (or coming off)
Note the three raised bolts just left of center in this image. They're the mounting bolts for the shift linkage bracket. Now going back on (or coming off)
0 2025/11/27 16:34:47
Placeholder
Placeholder
0 2025/11/27 16:34:44
Lubing pins for shift linkage
Lubing pins for shift linkage
0 2025/11/27 16:25:55
This'll do for lube
This'll do for lube
0 2025/11/27 16:25:53
Attempting Thai drunken noodles, but vegetarian. Honestly, Thai basil kind of sucks. And the recipe called for waaaay too much. It was a flop.
Attempting Thai drunken noodles, but vegetarian. Honestly, Thai basil kind of sucks. And the recipe called for waaaay too much. It was a flop.
0 2025/11/27 16:25:50
Getting shift linkage back near where it goes
Getting shift linkage back near where it goes
0 2025/11/27 16:25:47
Had to pause here because I lost my silicone paste. These days I use Haynes Food Safe silicone grease. It's cheap on amazon, and if you accidentally decide to eat some, it's okay-ish.
Had to pause here because I lost my silicone paste. These days I use Haynes Food Safe silicone grease. It's cheap on amazon, and if you accidentally decide to eat some, it's okay-ish.
0 2025/11/27 16:15:56
Here's a rather shitty image showing my (now un)binding up of the shift linkage with a black zip-ty... not good for show and tell, but essentially, you need to ensure that nothing can catch on the trans when you drop it/are fighting it back on. You can bind stuff however you want, just don't bend the slave cylinder's hardline or kink the shift linkage's cables... and HAVE A SPOTTER
Here's a rather shitty image showing my (now un)binding up of the shift linkage with a black zip-ty... not good for show and tell, but essentially, you need to ensure that nothing can catch on the trans when you drop it/are fighting it back on. You can bind stuff however you want, just don't bend the slave cylinder's hardline or kink the shift linkage's cables... and HAVE A SPOTTER
0 2025/11/27 16:15:54
Here's my manipulating the goofy slave cylinder.
Here's my manipulating the goofy slave cylinder.
0 2025/11/27 16:15:52
Uh
Uh
0 2025/11/27 16:15:49
Showing how I bound up the clutch slave cylinder. now unbinding
Showing how I bound up the clutch slave cylinder. now unbinding
0 2025/11/27 16:15:47
No clue what I'm trying to show here.. But if you're following along in reverse, maybe you'll know
No clue what I'm trying to show here.. But if you're following along in reverse, maybe you'll know
0 2025/11/27 16:15:43
0 2025/11/27 16:07:30
And here's where it connects.
And here's where it connects.
0 2025/11/27 16:05:17
Here's the tuck, or if you're reading in reverse for trans removal, you'll be pulling this connector up from back here
Here's the tuck, or if you're reading in reverse for trans removal, you'll be pulling this connector up from back here
0 2025/11/27 16:05:14
This wire... goes to. I forget. Trans speed sensor? Whatever. Note the wire, and the yellow arrow. This guy connects down the backside of the trans, just above the passenger side cv/axel/output shaft hole. Follow along
This wire... goes to. I forget. Trans speed sensor? Whatever. Note the wire, and the yellow arrow. This guy connects down the backside of the trans, just above the passenger side cv/axel/output shaft hole. Follow along
0 2025/11/27 16:02:01
0 2025/11/27 15:59:00
0 2025/11/27 15:56:49
In it goes.
In it goes.
0 2025/11/27 15:51:02
Last engine to trans bolt -- I did the others already.. For each image I'm posting here, I took between three and ten, which I'm now digging through to choose the best of. Oh. Do better than me. Draw more orientations on your bolt holder box. Draw vehicle front.
Last engine to trans bolt -- I did the others already.. For each image I'm posting here, I took between three and ten, which I'm now digging through to choose the best of. Oh. Do better than me. Draw more orientations on your bolt holder box. Draw vehicle front.
0 2025/11/27 15:51:00
Going back to torque the lower mount -- yes, this is supposed to be done now.
Going back to torque the lower mount -- yes, this is supposed to be done now.
0 2025/11/27 15:50:57
Taken over to a nearby tree... Every now and then, a bug gets lucky.
Taken over to a nearby tree... Every now and then, a bug gets lucky.
0 2025/11/27 15:50:54
These guys are more invasive than I'd realized.. getting up in my business.
These guys are more invasive than I'd realized.. getting up in my business.
0 2025/11/27 15:50:51
Wiper motor wiring harness clips back in
Wiper motor wiring harness clips back in
0 2025/11/27 15:50:48
Done with this -- will post measurements. I did take them.
Done with this -- will post measurements. I did take them.
0 2025/11/27 15:50:45
0 2025/11/27 15:47:12