It this possible with any form of FI? blowing your motor just by over revving it accidentally in neutral? that sucks! in the rare occasion i miss a gear, i tend to over rev most of the time. guess i gotta be more careful from now on...
it's not necessarily over revving in neutral
it's called a mechanical over rev
say ur in 3rd gear and ur at 6000 rpms and you engage 2nd gear instead of 4th. the l15 would rev somwhere around 8k rpms. which would blow your motor. even if it's for a split second it could do major damage.
i've heard many many stories of mechanical over rev on s2000. some people downshifted wrong and revved the f20c motor to 11k. boom.
motor = done
while mis shifting and grinding just wears the synchros in the tranny
and mis shifting and revving in neutral just wastes gas lol
Spoke to GReddy today and they confirmed that the fogs can be retained with their kit. They also told me that the size of the piping 50mm; not sure if this is just where the fogs sit or the the size piping for the whole IC kit... That said, I also spoke to Ben (AJ-R) and he said that 60mm and 70mm piping is used in the T1R kit.
I'll try and see what the size piping the HKS kit is using...
The OP stated that the kit is suppose to be the same turbo that's used in GReddy's Scion Xb's kit (TF-035-14GK) ... that retails for $2950 on their site; so i'm guessing somewhere around that? ... As for actual specs, all I know is that it'll come with a Cast manifold and the E-manage.
ok, just got word from the guy running the HKS kit and he said the kit came with 2 inch IC piping which is approxx 50 mm... I honestly dont know what GReddy is doing differently... I'll try to get some pics....
ok, just got word from the guy running the HKS kit and he said the kit came with 2 inch IC piping which is approxx 50 mm... I honestly dont know what GReddy is doing differently... I'll try to get some pics....
__________________
07 Honda Fit sport 5Speed M/T aka New York JAZZ Fit Motivation 101
Mods Installed--> soon to be HKS turbo powered
the fits are so underestimated...they r beasts in sheeps clothing~ anonymous
I wanna set this at the highest psi possible. perhaps 8 psi?
and which turbo is used in the GReddy kit?
kraftwerks made 190 whp with their supercharger kit, but it was with custom internals and not made for street use. i think it was at ten psi, but their kits are a lot easier on engines simply because of the design.
4.5 psi @ 122hp? how much horsepower do you think it will make if i add header, test pipe, cat-back exhasut, and bump it to 6 psi? i'm hoping for the 180-190 range. what size turbo are they using?
what would be the advantages of buying this instead of the t1r turbo kit other then keeping the fog lights?
I wanna set this at the highest psi possible. perhaps 8 psi?
and which turbo is used in the GReddy kit?
The turbo used the TF-035.
The turbo is good for up to 250whp, Per greddy rep.
Quote:
Originally Posted by drunkvabiker
greddy bov?
It wasn't included with my kit, THOUGH I did buy one from them and it'll be going in soon.
Quote:
Originally Posted by revd34
4.5 psi @ 122hp? how much horsepower do you think it will make if i add header, test pipe, cat-back exhasut, and bump it to 6 psi? i'm hoping for the 180-190 range. what size turbo are they using?
what would be the advantages of buying this instead of the t1r turbo kit other then keeping the fog lights?
h/t/e - assuming that you also re-tune, I really think this kit is capable of making roughly 160whp or so
Benifits:
- The Greddy Kit is pending carb exemption.
- If you live in the States, shipping will be less and you won't have about brokage.
- T1R kit is almost $4k and this kit will run between $3k-$3.5K.
I honestly think that the T1R kit and the GReddy are VERY similar.
... I hope to have some pics posted for you guys soon
GD3 Squad Member #72 
Linear Mode
