Squeaky Clutch pedal
#1
Squeaky Clutch pedal
Anyone have or resolve a squeaky clutch pedal?
When I let the pedal out, I get a nice squeak. Very annoying now that I noticed it.
Tried looking, lubing, and spraying a little around the pedal assembly, but no luck.
When I let the pedal out, I get a nice squeak. Very annoying now that I noticed it.
Tried looking, lubing, and spraying a little around the pedal assembly, but no luck.
#3
Well I went back and added some more lube and really greased up the spring. Was squeeking when I finished, but after sitting for some time, something must have worked into the squeek and it's quiet....for now.
#8
I'm also getting the squeaky clutch syndrome. I can't see the spring. I'm just having trouble getting a good look in the well, let alone trying to spray any lube on the culprit.
Is there anybody with some pictures, and/or instructions on how to remove the plastic trim above the pedals so I have access to the damn thing or is that just unnecessary?
_____JUST noticed this thread is in GD section ---- no biggy considering the nature of the issue
Is there anybody with some pictures, and/or instructions on how to remove the plastic trim above the pedals so I have access to the damn thing or is that just unnecessary?
_____JUST noticed this thread is in GD section ---- no biggy considering the nature of the issue
Last edited by EpilepticFit; 09-11-2011 at 11:42 PM.
#11
I'm also getting the squeaky clutch syndrome. I can't see the spring. I'm just having trouble getting a good look in the well, let alone trying to spray any lube on the culprit.
Is there anybody with some pictures, and/or instructions on how to remove the plastic trim above the pedals so I have access to the damn thing or is that just unnecessary?
Is there anybody with some pictures, and/or instructions on how to remove the plastic trim above the pedals so I have access to the damn thing or is that just unnecessary?
In the meantime, I'm wondering if the clutch switch assembly is causing the squeaking? For reference, it's ref #4 in this Fit Pedal diagram
Just throwing it out there
#12
Stopped my squeak
There should just be a few tabs or clips holding it in, but I'll do some research on this and get back to you
In the meantime, I'm wondering if the clutch switch assembly is causing the squeaking? For reference, it's ref #4 in this Fit Pedal diagram
Just throwing it out there
In the meantime, I'm wondering if the clutch switch assembly is causing the squeaking? For reference, it's ref #4 in this Fit Pedal diagram
Just throwing it out there
I didn't need to remove any trim panels. I simply sprayed a little white lithium grease from a can w/ a straw onto the pushrod that the pedal pushes thru the firewall into the clutch master cylinder. Worked the pedal a few times and squeak is gone. Simpler than I hoped for. Not bad, first time it's needed lubrication in 195,000 miles.
#13
************************************************** ****
I didn't need to remove any trim panels. I simply sprayed a little white lithium grease from a can w/ a straw onto the pushrod that the pedal pushes thru the firewall into the clutch master cylinder. Worked the pedal a few times and squeak is gone. Simpler than I hoped for. Not bad, first time it's needed lubrication in 195,000 miles.
I didn't need to remove any trim panels. I simply sprayed a little white lithium grease from a can w/ a straw onto the pushrod that the pedal pushes thru the firewall into the clutch master cylinder. Worked the pedal a few times and squeak is gone. Simpler than I hoped for. Not bad, first time it's needed lubrication in 195,000 miles.
Thread
Thread Starter
Forum
Replies
Last Post
EMC2
Fit DIY: Repair & Maintenance
3
07-07-2015 12:18 PM