Guys i was wondrin I got a Honda fit 2007. . . . I want some BBS RS on but I do not know what size and what tire should I buy. . . can 17x8.5 fit what tire? modifications? please help thanks in advance I'm new here

 

use the search button and do research on this forum first..

you have to take wheel size, offset and tire size into consideration.. and with that consideration, then you'll know if you need modifications to the fenders or not.

 

I already did the research sir. . . but their set ups are different. . more on fashion thing I was wondering if the 17x8.5 can fit without hitting the fenders

 

depends on offset.

 

kind sir do you have any idea on the offset that will fit? =(

 

Welcome aboard. As mentioned, you need to look around the forum threads for your answer. Here's a good start for tires and wheels:
Tire, Wheel, Brake & Suspension Forum sponsored by The Tire Rack - Unofficial Honda FIT Forums

Take your time. Good luck!

 

thank you very much sir. . . i'm very confused regarding what tire and wheel offset to use so that the rims and tire wont hit the fenders. . thanks

 

Im 2008, lowered about 1.5 inches from stock, with 15x7 +40offset, and 195/55/15 tires, my fenders are rolled flat and slightly pulled. the tires rub in the rear on harsh bumps with a lot of weight in the car and at high speeds while the front rubs only during sharp turns at low speeds such as parking lots. I would think that 8.5 would be very wide. youre gonna need to be cambered out and your fenders are gonna need a lot of pulling and of course a rolling to make them fit. the fit is not a car that accepts agressive wheels easily, sorry bro

 

OP In the three hours over which you had responded to this thread you could have found the answer by searching this forum.

Could you be more lazy?

 

+1,000,000

Google is your friend.

And by the way...8.5" on a GD is just asking for trouble, period.

 

put it this way my 15x7 +32 where pretty flush with the fenders and I rubbed on bumps and turns.