2nd Generation (GE 08-13) 2nd Generation specific talk and questions here.

Engine got sound when idling

Thread Tools
 
Search this Thread
 
Old Dec 7, 2017 | 07:28 AM
  #1  
Adrian Wee's Avatar
Thread Starter
|
New Member
Joined: Dec 2017
Posts: 4
From: Singapore
Question Engine got sound when idling

Hi guys. Need some opinion. My GE6 Jazz 2009 model MT 180,000km mileage. Recently when the car is idling with air con on or when I moving off and the rpm is low there is a ratting noise coming out from the engine. When driving there is no abnormal sound, engine is smooth. Then I get my mech to jack up the car and the noise is coming out under the engine compartment where the oil pan is. No sound from the clutch side. He open the clutch cover and check clutch is ok. He says needs to open up the engine and check. Suspend crankshaft or the bearings got problem. Not sure of the damaged. Anyone had such problem before? Can the car still be driven and will the engine be damaged in the long run? Please advice. So far engine is running fine without any degrading to the power or FC.
 
Old Dec 7, 2017 | 02:31 PM
  #2  
GAFIT's Avatar
Member
Joined: Feb 2008
Posts: 4,329
From: Cleveland, GA
5 Year Member
Any change in the sound if the clutch is pressed in vs left out?

It could be rod bearings, but clutch throw out bearing is much more likely.
 
Old Dec 8, 2017 | 02:50 AM
  #3  
Adrian Wee's Avatar
Thread Starter
|
New Member
Joined: Dec 2017
Posts: 4
From: Singapore
Definitely not clutch. Press already still same. Went to another workshop tell me is tappet sound. Can live with it.
 
Old Dec 8, 2017 | 06:04 AM
  #4  
Adrian Wee's Avatar
Thread Starter
|
New Member
Joined: Dec 2017
Posts: 4
From: Singapore
But after thinking should not be the tappet sound. More like con rod bearings. Only occurs at idling with ac on and moving off when rpm drops. Then anything above 900rpm sound gone. Engine smooth no sound no vibration. Dunno should I get it fix? Will it escalate to bigger problems? Please advise anyone?
 
Old Dec 9, 2017 | 01:15 AM
  #5  
Adrian Wee's Avatar
Thread Starter
|
New Member
Joined: Dec 2017
Posts: 4
From: Singapore
OK fix done. Went for a third opinion at a slightly more expensive and reliable workshop. The boss told me engine mounting problem. Changed out all the mounting problem solved.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ck42
2nd Generation (GE 08-13)
35
Jan 4, 2020 04:35 PM
fladed
2nd Generation (GE 08-13)
3
Jun 2, 2018 12:34 PM
EcoBoost
3rd Generation (2015+)
20
Feb 8, 2016 06:47 PM
Nvillegas
General Fit Talk
4
Sep 30, 2013 11:24 PM
jbolanos
General Fit Talk
18
Jun 13, 2007 04:26 PM




All times are GMT -4. The time now is 10:06 AM.