When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This is kind of a evaluation/opinion cop out. But I would say I like both looks.
The lighter colored wheels, give a great contrast, and I think a lighter..fun look to the vehicle.
The darker colored wheels, obviously don't contrast, but also give a real sharp look.
If I had to pick?
I think I'd go with the lighter colored wheels, if only because I've seen the darker colored wheels on more vehicles.
Contrasting may not be as popular, but it's more unique.
But really, both looks are good.
I agree they both have their look, I pefer the contrast myself.
Was in my local Honda Dealership the other day while I had the B-1 maintenance done. As they hope, I killed time by walking their show room.
They had a new 2018 Fit on the floor, with gloss black wheels. They looked great, and I imagined how good I thought they would look on my 2016 Black Fit.
BUT...
If they are now selling a number of Honda Fits with Black Wheels? I would think that would make that look all the more common.
I think the common trends go back and forth. But usually the trend is to go "counter" to what is offered from the factory. When that becomes popular? Then the manufacturer catches up, starts offering a similar product...that becomes common, and then everyone starts switching to a different aftermarket look.
Or at least that's my theory.
Originally wanted a Hexlite cargo mat, but they are very expensive to ship to Canada. So I got this Lloyd's Rubbertite. Not quite as red as on their website. Even though it's sitting on 1/4" pineboard, it still fits well.
I didn't want to create a new thread for this, so this one seemed to be the most appropriate.
Back when I first got my GK5 in 2015, I randomly received a package from Honda about 2 months later.
I haven't seen it mentioned on the forum before, so I just thought I'd see if anybody also received one of these as well.
I didn't want to create a new thread for this, so this one seemed to be the most appropriate.
Back when I first got my GK5 in 2015, I randomly received a package from Honda about 2 months later.
I haven't seen it mentioned on the forum before, so I just thought I'd see if anybody also received one of these as well.
I didn't want to create a new thread for this, so this one seemed to be the most appropriate.
Back when I first got my GK5 in 2015, I randomly received a package from Honda about 2 months later.
I haven't seen it mentioned on the forum before, so I just thought I'd see if anybody also received one of these as well.
Inside was this!
MBN! I didnt get one of those. I wish i got one though
I didn't want to create a new thread for this, so this one seemed to be the most appropriate.
Back when I first got my GK5 in 2015, I randomly received a package from Honda about 2 months later.
I haven't seen it mentioned on the forum before, so I just thought I'd see if anybody also received one of these as well.
Inside was this!
Got mine still in the original box from my 2015 GK!
Off EBay, around $AUD19. Got the one that has a wire inside not the zig-zag PCB. Thought it'd be bad but comparing weak stations on FM and AM, no difference
Painted it with black satin epoxy (came black but glossy, didn't like it). Was afraid the red would not match my red and this car has loots of black trims, so...
NOTES:
1) the sticky pad that comes with it is useless, it will wrinkle etc - I used black (good!) molding tape
2) the profile of the fin does not match 100% the roof profile so you will have to test and sand it, tip and end from memory... make sure water cannot get inside - maybe leave a small gap at back for drainage? If water trapped it will rust eventually.
3) I tried with a length of wire (speaker OFC) connected and folded inside, no difference to signal...
Test fitting the rear bumper leds / turn signal lights. Installing if i can get a wire diagram and access to everything.
Ordering parts for heated mirrors / side turn signal lights. Not really an issue starting now but clearing the mirrors sucked with all the snow and ice. Time to get a head start and install while the weather is good.
Parts for reference:
76251-T5R-P01ZG
left skull cap, Alabaster Silver metallic
76201-T5R-P01ZG
right skull cap, Alabaster Silver metallic
34350-T2A-A02
Left Blinker
34300-T2A-A02
Right Blinker
76253-T5R-306
Left Mirror Glass (heated)
76203-T5R-306
Right Mirror Glass (heated)
Anybody have a part number of any connectors so i can avoid splicing everything? I still need to source a relay or two and plan out that wiring
......
Ordering parts for heated mirrors / side turn signal lights. Not really an issue starting now but clearing the mirrors sucked with all the snow and ice. Time to get a head start and install while the weather is good.
Parts for reference:.........
Anybody have a part number of any connectors so i can avoid splicing everything? I still need to source a relay or two and plan out that wiring
Blinkers and heated mirrors I still need to reinstall on my 2017 from my 2015. I will run the blinker wires to the rear blinker wires this time since I already did work for my trailer lighting. The heated mirror positive wires I would run from the inside of the cabin back out to the engine bay through the passenger side grommet out to the relay cluster, and put a relay next to the rear window defroster relay to engage the mirrors. As I mentioned on my visitor page message the connectors to the mirrors have empty slots for the blinkers and mirrors, but to find the EX-L harness with the wires, and install that, way more work than necessary.
Horns can be replaced without removing the bumper. I've rolled the front grill to access the front horn (pic is in my build thread), and turning the steering wheel to the left, you can access the low tone horn from the fender in front of the passenger side front tire.
For the mirror blinkers, I followed Bassguitarist's thread. I wired the turn signal to my rears because I already had my pillar lights wired too. I put a basic wiring diagram for that on my build thread.
