Fit Engine Modifications, Motor Swaps, ECU Tuning Reference Library for Engine Modifications, Swaps and Tuning

KTuner ECU Reflash

  #21  
Old 12-19-2014, 06:45 PM
13fit's Avatar
Member
Join Date: Dec 2012
Location: Ft.Hood TX // LaCrosse WI
Posts: 1,911
Glad you made an account Ktuner! I actually just finished another email to you!

Id suggest browsing some of tech forums on here to get an idea of what we have been doing to overcome our lack of support.

Most of it is going to be the usual bolt on optimizations, but alot of the supercharger owners are wanting a more reliable and easier way to tune.

Especially since the SC kits are restricted variants for other markets.
 
  #22  
Old 12-19-2014, 06:57 PM
13fit's Avatar
Member
Join Date: Dec 2012
Location: Ft.Hood TX // LaCrosse WI
Posts: 1,911
Ktuned, I do have a scanner that allows datalogging and saving to my phone via the Torque Pro app for android. I currently am maxed out on boltons besides the maxbore TB upgrade and porting the intake manifold.

Currently running 87 octane and IK22s from a S2000 for cheapness, but I can datalog and send if you need a good 93 octane datalog. Its a pretty large timing adjustment on these cars.

Plus the center mounted crank sensor acts like a secondary knock sensor, it goes off like crazy when you use light weight flywheels.

THAT alone would be a major tuning support. Letting us use lighter rotating mass without having to go spend 100-150 at the honda dealership to do a crank sensor relearn
 
  #23  
Old 12-19-2014, 09:16 PM
Member
Join Date: Sep 2012
Location: Arizona
Posts: 825
Originally Posted by KTuner View Post
I've registered as asked by community members. If admins are going to take issue with me being here and answering questions that may arise please let me know ahead of time.
I was thinking of telling you about all the interest for at least the GE but I thought that the device would only work for K-series engines. Glad to see you here too!
 
  #24  
Old 12-19-2014, 10:33 PM
Member
5 Year Member
Join Date: Oct 2013
Location: Burbank Ca
Posts: 25
woop woooooop!
 
  #25  
Old 12-19-2014, 10:39 PM
xxryu139xx's Avatar
Super Moderator
iTrader: (1)
Join Date: Aug 2012
Location: Union, NJ
Posts: 3,340
lets get this done!
 
  #26  
Old 12-20-2014, 01:14 AM
Member
5 Year Member
Join Date: Oct 2013
Location: Philippines
Posts: 214
Originally Posted by Steven Hung View Post
This could get interesting. Could KTuner be used for forced induction with the factory AFM based calibration? These are a few of thing that pops into my mind.

Calibration for after market intake
Calibration for larger injectors
Retard timing on boost
Adjust fuel trim on boost
Real-time data logging to laptop
May i add, higher rev limit.
 
  #27  
Old 12-20-2014, 02:03 AM
13fit's Avatar
Member
Join Date: Dec 2012
Location: Ft.Hood TX // LaCrosse WI
Posts: 1,911
Max redline I would use is 7500rpm. it will help quite a bit on the quarter mile.

In completely stock form I hit the finish line before hitting the top of third gear (redline 3rd is 82-83mph)

My last drag race in texas I was in 4th gear for a second or two (I think my datalog said 89mph) on my fastest run I ever did with my car.

Getting those extra 500 or so rpms would help immensely for us draggers
 
  #28  
Old 12-20-2014, 09:19 AM
1SickVeilsideZ's Avatar
Member
5 Year Member
iTrader: (5)
Join Date: Sep 2011
Location: Cali
Posts: 726
I'm in for this. Hopefully they will be able to support us guys that are running superchargers.
 
  #29  
Old 12-20-2014, 11:50 AM
Member
Join Date: Dec 2014
Location: Arizona
Posts: 92
Originally Posted by DWils View Post
I was thinking of telling you about all the interest for at least the GE but I thought that the device would only work for K-series engines. Glad to see you here too!
But I have R18 support already.

Thanks for the interest shown so far guys. I'll FIT as much as I can into the short term schedule and ask for some testers shortly.
 
  #30  
Old 12-20-2014, 01:44 PM
Myxalplyx's Avatar
Member
5 Year Member
Thread Starter
Join Date: May 2014
Location: Delaware
Posts: 1,856

^^^I had an image in my head that this device is all I'd need to plug into the OBD2 port and use the white cord to connect to my computer to upload/download information. Is this correct?



Or will I have to open my ECU up and solder the red piece to my ECU board that you see in this picture below?


I have no soldering skills and would need help with this. Just preparing before the package arrives.


I read about the red hardware piece on the website --> Hardware Installation
I'm hoping the OBD2 connector is an upgraded version of the red hardware piece that may have had to be installed on the earlier versions.
 

Last edited by Myxalplyx; 12-20-2014 at 01:46 PM.
  #31  
Old 12-20-2014, 01:47 PM
Member
Join Date: Dec 2014
Location: Arizona
Posts: 92
You're looking in the In-ECU section of the help instead of the OBD2 Interface section. Fit will be listed in the Flash section of the applications list, not In-ECU.
 
  #32  
Old 12-20-2014, 01:53 PM
Myxalplyx's Avatar
Member
5 Year Member
Thread Starter
Join Date: May 2014
Location: Delaware
Posts: 1,856
Originally Posted by KTuner View Post
You're looking in the In-ECU section of the help instead of the OBD2 Interface section. Fit will be listed in the Flash section of the applications list, not In-ECU.
Thanks for clearing this up. This'll stop any potential panic attacks from happening if others run into that same section on the help page.
 
  #33  
Old 12-20-2014, 01:59 PM
Member
Join Date: Dec 2014
Location: Arizona
Posts: 92
No doubt.
 
  #34  
Old 12-21-2014, 01:40 AM
13fit's Avatar
Member
Join Date: Dec 2012
Location: Ft.Hood TX // LaCrosse WI
Posts: 1,911
Myxalplyx even if it needed soldering, NO DAMN COMPLAINING

(Id do it for you lol) I get to solder capacitors on my video cards whenever my overclocks/overvolts overstress the stuff lol

Do you need a small netbook temporarily to datalog? I think I got a NB255 laying around with 250gb and win7 32bit tweaked up on it.
 
  #35  
Old 12-21-2014, 03:06 AM
Member
5 Year Member
Join Date: Oct 2013
Location: Philippines
Posts: 214
Originally Posted by Myxalplyx View Post
I'll be posting updates since I see the unit is on its way. Kinda sitting back and letting thread the take a life of its own.

Huge thanks for stopping by and being supportive.
And thank YOU for bringing this to our attention!

Do post updates and let us know how it goes for you. It'll get us really excited!
 
  #36  
Old 12-21-2014, 10:01 AM
Member
Join Date: Dec 2014
Location: Arizona
Posts: 92
The OP took the time to check his part number so I could make sure he could be supported right away. If some of you who are interested want to check your part numbers on the ECU in the engine bay and email that info in, that'd be excellent.
 
  #37  
Old 12-21-2014, 11:20 AM
Member
5 Year Member
Join Date: Apr 2011
Location: Madison
Posts: 250
Originally Posted by KTuner View Post
The OP took the time to check his part number so I could make sure he could be supported right away. If some of you who are interested want to check your part numbers on the ECU in the engine bay and email that info in, that'd be excellent.
Here is mine: 2011 Fit Sport 5MT ECU Part# 37820-RP3-A15 6871-101593
 
  #38  
Old 12-21-2014, 11:59 AM
BMW ALPINA's Avatar
Member
5 Year Member
iTrader: (1)
Join Date: Jan 2013
Location: California
Posts: 2,348
I have a (GE) 2013 Fit Sport AUTOMATIC Transmission,

according to Bernardi Parts Catalog,

the part number for the ECU : 37820-RP3-A77
 
  #39  
Old 12-21-2014, 12:29 PM
Member
Join Date: Dec 2014
Location: Arizona
Posts: 92
Thanks. I have the catalog numbers, I'm looking for actual numbers to verify everything can be covered with what I already have.
 
  #40  
Old 12-21-2014, 01:47 PM
Myxalplyx's Avatar
Member
5 Year Member
Thread Starter
Join Date: May 2014
Location: Delaware
Posts: 1,856
Originally Posted by 13fit View Post
Myxalplyx even if it needed soldering, NO DAMN COMPLAINING

(Id do it for you lol) I get to solder capacitors on my video cards whenever my overclocks/overvolts overstress the stuff lol

Do you need a small netbook temporarily to datalog? I think I got a NB255 laying around with 250gb and win7 32bit tweaked up on it.
Thanks 13fit! I appreciate the help/offer. I'm cool with the notebook and all. Everything is pretty much ready to go.

Currently I'm already looking further out at other items (Cams, Intake manifold, fuel injectors, etc). It would be good to have these items manifesting themselves by the time the Ktuner ECU-tuning portion reaches full maturity.
 

Last edited by Myxalplyx; 12-21-2014 at 05:53 PM.

Thread Tools
Search this Thread
Quick Reply: KTuner ECU Reflash


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.