Jackson Racing please....
That's what I like to hear. 5psi correct? I know the kit's not out, but was it truly bolt-in? I saw this again in the SIphon magazine and they had good things to say about it. How's the BOV? My guess is you're hitting mid/low 15s? I know EPs aren't that fast though, good to know it pulls better than one =) Also, is it your DD?
Frequent FitFreak Poster
Joined: May 2006
Posts: 588
From: San Angelo, TX
Frequent FitFreak Poster
Joined: May 2006
Posts: 588
From: San Angelo, TX
Hey Chris, could you explain to us on how cool the BOV sounds like? I didn't know this kit had one.
I know this has probably been asked before, but with a 5psi kit, do we need to get a autotranny cooler? If it helps to have one, I'll get one. but if the tranny runs just fine with the 5psi kit, I'll hold off the cooler for a while.
-Tomi
I know this has probably been asked before, but with a 5psi kit, do we need to get a autotranny cooler? If it helps to have one, I'll get one. but if the tranny runs just fine with the 5psi kit, I'll hold off the cooler for a while.
-Tomi
Hey Chris, could you explain to us on how cool the BOV sounds like? I didn't know this kit had one.
I know this has probably been asked before, but with a 5psi kit, do we need to get a autotranny cooler? If it helps to have one, I'll get one. but if the tranny runs just fine with the 5psi kit, I'll hold off the cooler for a while.
-Tomi
I know this has probably been asked before, but with a 5psi kit, do we need to get a autotranny cooler? If it helps to have one, I'll get one. but if the tranny runs just fine with the 5psi kit, I'll hold off the cooler for a while.
-Tomi
Member
Joined: Apr 2007
Posts: 821
From: Nanuet, NY
Pro:
Should last about 200,000 miles with normal maintenance.
Great looks. Should get about the same mileage without stepping on it.
Con:
Need PREMIUM gas. Ooof! I bought the Fit to get away from that. Now, how bad do I want that Scharger. I have been drooling since I saw the first post about it.
Should last about 200,000 miles with normal maintenance.
Great looks. Should get about the same mileage without stepping on it.
Con:
Need PREMIUM gas. Ooof! I bought the Fit to get away from that. Now, how bad do I want that Scharger. I have been drooling since I saw the first post about it.
Member
Joined: Jun 2006
Posts: 683
From: milwaukee, WI
Wait I thought that Oscar said there wasn't a BOV but an RV on the kit. Is this something you added or will it be in the kit?
Hello Jackson Racing,
So I just read all 20 pages of this thread. Dayum.
(1) Is it possible to get around 125-130 wheel HP on
an A/T Fit with the 5# sc kit plus any other mods,
and CARB legal? I ask because I see 120 WHP
for the MT 5# version. I would like 5-10 more, but
on the AT. Not sure I would trouble myself to go from
80 WHP to 105 WHP on the AT. But if it's around
125-130 WHP, I'm there.
(2) I am a modest driver, but would enjoy more freeway
merging/passing power. Usually I toodle in the slow
lane about 60-65 mph, and get 35-40 mpg. Would I still get
about the same mileage for freeway cruising?
(3) Does the 5# kit require premium strictly, or would regular
get by okay within standard knock sensor range? ie, will
regular knock something awful, or will the timing be retarded
enough to handle it? (ie, someone puts regular into the
vehicle accidentally -- does the engine get damaged?)
(4) How many estimated hours for install, *and*
uninstall (for that darned every 2-year CA smog check).
About the price, I almost bought a loaded Audi A3, and the
Fit was less than 1/2 the price of the A3, out the door. The
reliability of my previous VW turned me off from buying the
Audi. ie, I bought the Fit because there was no other car that
I was willing to lay the big $$$ cash down for. The Fit was a
cheap no-brainer. But I'll pony up for a somewhat more
powerful Fit, if I can still score good freeway mpg.
Thanks!
So I just read all 20 pages of this thread. Dayum.
(1) Is it possible to get around 125-130 wheel HP on
an A/T Fit with the 5# sc kit plus any other mods,
and CARB legal? I ask because I see 120 WHP
for the MT 5# version. I would like 5-10 more, but
on the AT. Not sure I would trouble myself to go from
80 WHP to 105 WHP on the AT. But if it's around
125-130 WHP, I'm there.
(2) I am a modest driver, but would enjoy more freeway
merging/passing power. Usually I toodle in the slow
lane about 60-65 mph, and get 35-40 mpg. Would I still get
about the same mileage for freeway cruising?
(3) Does the 5# kit require premium strictly, or would regular
get by okay within standard knock sensor range? ie, will
regular knock something awful, or will the timing be retarded
enough to handle it? (ie, someone puts regular into the
vehicle accidentally -- does the engine get damaged?)
(4) How many estimated hours for install, *and*
uninstall (for that darned every 2-year CA smog check).
About the price, I almost bought a loaded Audi A3, and the
Fit was less than 1/2 the price of the A3, out the door. The
reliability of my previous VW turned me off from buying the
Audi. ie, I bought the Fit because there was no other car that
I was willing to lay the big $$$ cash down for. The Fit was a
cheap no-brainer. But I'll pony up for a somewhat more
powerful Fit, if I can still score good freeway mpg.
Thanks!
Last edited by xorbe; May 1, 2007 at 12:44 AM.
Hello Jackson Racing,
So I just read all 20 pages of this thread. Dayum.
(1) Is it possible to get around 125-130 wheel HP on
an A/T Fit with the 5# sc kit plus any other mods,
and CARB legal? I ask because I see 120 WHP
for the MT 5# version. I would like 5-10 more, but
on the AT. Not sure I would trouble myself to go from
80 WHP to 105 WHP on the AT. But if it's around
125-130 WHP, I'm there.
1. The kit might make it close to there. My fit dynoed at 142whp with a header back exhaust. So to achieve your goal of 125-130 it should be pretty easy.
(2) I am a modest driver, but would enjoy more freeway
merging/passing power. Usually I toodle in the slow
lane about 60-65 mph, and get 35-40 mpg. Would I still get
about the same mileage for freeway cruising?
I am still getting the same gas mileage I was getting before.
(3) Does the 5# kit require premium strictly, or would regular
get by okay within standard knock sensor range? ie, will
regular knock something awful, or will the timing be retarded
enough to handle it? (ie, someone puts regular into the
vehicle accidentally -- does the engine get damaged?)
3. You HAVE to run at least 91 octane
(4) How many estimated hours for install, *and*
uninstall (for that darned every 2-year CA smog check).
4. This one I dont know. lol. but the you wouldnt have to remove it for smog.
About the price, I almost bought a loaded Audi A3, and the
Fit was less than 1/2 the price of the A3, out the door. The
reliability of my previous VW turned me off from buying the
Audi. ie, I bought the Fit because there was no other car that
I was willing to lay the big $$$ cash down for. The Fit was a
cheap no-brainer. But I'll pony up for a somewhat more
powerful Fit, if I can still score good freeway mpg.
Thanks!
So I just read all 20 pages of this thread. Dayum.
(1) Is it possible to get around 125-130 wheel HP on
an A/T Fit with the 5# sc kit plus any other mods,
and CARB legal? I ask because I see 120 WHP
for the MT 5# version. I would like 5-10 more, but
on the AT. Not sure I would trouble myself to go from
80 WHP to 105 WHP on the AT. But if it's around
125-130 WHP, I'm there.
1. The kit might make it close to there. My fit dynoed at 142whp with a header back exhaust. So to achieve your goal of 125-130 it should be pretty easy.
(2) I am a modest driver, but would enjoy more freeway
merging/passing power. Usually I toodle in the slow
lane about 60-65 mph, and get 35-40 mpg. Would I still get
about the same mileage for freeway cruising?
I am still getting the same gas mileage I was getting before.
(3) Does the 5# kit require premium strictly, or would regular
get by okay within standard knock sensor range? ie, will
regular knock something awful, or will the timing be retarded
enough to handle it? (ie, someone puts regular into the
vehicle accidentally -- does the engine get damaged?)
3. You HAVE to run at least 91 octane
(4) How many estimated hours for install, *and*
uninstall (for that darned every 2-year CA smog check).
4. This one I dont know. lol. but the you wouldnt have to remove it for smog.
About the price, I almost bought a loaded Audi A3, and the
Fit was less than 1/2 the price of the A3, out the door. The
reliability of my previous VW turned me off from buying the
Audi. ie, I bought the Fit because there was no other car that
I was willing to lay the big $$$ cash down for. The Fit was a
cheap no-brainer. But I'll pony up for a somewhat more
powerful Fit, if I can still score good freeway mpg.
Thanks!
Header-back exhaust, does that remove or keep the cat converter (ie, CARB conforming?)
I sure could use a down-to-earth explanation of a typical aftermarket setup and prices specific to the Fit. I understand that (1) intake get more air to the engine (2) supercharger stuff more air into the engine (3) exhaust get it out of the engine -- but I don't really know the specifics of what I'm suppose to be shopping for.
So (3) I find a more free-flowing exhaust, without the racer-boy soundtrack. And (2) that's what we're waiting for in this forum thread. What about (1) do I need to be changing header or intakes or something for more real-world gains?
I sure could use a down-to-earth explanation of a typical aftermarket setup and prices specific to the Fit. I understand that (1) intake get more air to the engine (2) supercharger stuff more air into the engine (3) exhaust get it out of the engine -- but I don't really know the specifics of what I'm suppose to be shopping for.
So (3) I find a more free-flowing exhaust, without the racer-boy soundtrack. And (2) that's what we're waiting for in this forum thread. What about (1) do I need to be changing header or intakes or something for more real-world gains?
Member
Joined: Jul 2006
Posts: 431
From: Marietta, GA
I was quoted (over the phone and you know what THAT means...) from my 'car club' of over $950.00 just on installation... Is there a separate unit for the AT? As you know the CAI is just for the MT and that pic of the SC unit from J's looks as if it is supposed to go down the fender well?!?
Header-back exhaust, does that remove or keep the cat converter (ie, CARB conforming?)
Yes i removed my cat and replaced it with a test pipe.
I sure could use a down-to-earth explanation of a typical aftermarket setup and prices specific to the Fit. I understand that (1) intake get more air to the engine (2) supercharger stuff more air into the engine (3) exhaust get it out of the engine -- but I don't really know the specifics of what I'm suppose to be shopping for.
[b] This is all depending on what you want to do with your car, what kind of power, and your budget. You will make gains with your normal I/H/E But they will be minimal. With my header back before the SC i was making likw 8whp. Although the torque imrpoved alot more and you could really feel the difference.
So (3) I find a more free-flowing exhaust, without the racer-boy soundtrack. And (2) that's what we're waiting for in this forum thread. What about (1) do I need to be changing header or intakes or something for more real-world gains?
With the Jackson kit, you wont need a intake, it essentially comes with one. Anytime you add, say a header/exhaust, to a FI setup it will help you. I think with just a header and exhaust you should easily be able to make about 7whp extra.
Yes i removed my cat and replaced it with a test pipe.
I sure could use a down-to-earth explanation of a typical aftermarket setup and prices specific to the Fit. I understand that (1) intake get more air to the engine (2) supercharger stuff more air into the engine (3) exhaust get it out of the engine -- but I don't really know the specifics of what I'm suppose to be shopping for.
[b] This is all depending on what you want to do with your car, what kind of power, and your budget. You will make gains with your normal I/H/E But they will be minimal. With my header back before the SC i was making likw 8whp. Although the torque imrpoved alot more and you could really feel the difference.
So (3) I find a more free-flowing exhaust, without the racer-boy soundtrack. And (2) that's what we're waiting for in this forum thread. What about (1) do I need to be changing header or intakes or something for more real-world gains?
With the Jackson kit, you wont need a intake, it essentially comes with one. Anytime you add, say a header/exhaust, to a FI setup it will help you. I think with just a header and exhaust you should easily be able to make about 7whp extra.
Member
Joined: Dec 2006
Posts: 60
From: Lancaster, CA
Originally Posted by xorbe 
Header-back exhaust, does that remove or keep the cat converter (ie, CARB conforming?)
Yes i removed my cat and replaced it with a test pipe.
For those who wish to remain CARB legal, remember that several of the magazines have tested high flow cats vs test pipes and consistently found less than 3 hp difference between the two. So when you are adding 50-70 hp with the SC that would be totally unnoticeable.
Header-back exhaust, does that remove or keep the cat converter (ie, CARB conforming?)
Yes i removed my cat and replaced it with a test pipe.
For those who wish to remain CARB legal, remember that several of the magazines have tested high flow cats vs test pipes and consistently found less than 3 hp difference between the two. So when you are adding 50-70 hp with the SC that would be totally unnoticeable.