Independent foglight problem!!!!! please help!
#1
Independent foglight problem!!!!! please help!
i just did the independent foglight mod by running the wire from the steering wheel to the one of the fuses in the fuse box with an add a circuit, for sum reason i woke up to go to work and my power steering, my mileage meter, and speedometer/mph gauge wasnt working at all, so when i got home i re connected everything the way it was before and even tried it on different fuses and whatever fuse i put it on it wont let something function right, im leaving it the way it was but i was wondering wny the hell it did this bec it scarred the crap out of me bec i thought i fried the comp or something. has anyone else had this problem? i didnt disconnect the battery when i did it and i have luminics foglight bulbs if that helps for an answer
#3
Did you try putting it into a spot with an existing fuse or did you just stick it in an empty spot? Make sure you do the latter or check the fuse panel to see where you're sticking it. There should be enough empty spots under there to just plug it in, either that or you cut the wrong wire on the steering wheel column. Did you verify that the fogs were actually turning on independently?
#4
Did you try putting it into a spot with an existing fuse or did you just stick it in an empty spot? Make sure you do the latter or check the fuse panel to see where you're sticking it. There should be enough empty spots under there to just plug it in, either that or you cut the wrong wire on the steering wheel column. Did you verify that the fogs were actually turning on independently?
#8
are you sure that would work? bec i dont want to try anything else that will mess anything else up
#10
nope no need to, i tried it again today and all i needed way two 10 amp fuses in the add a circuit for them to work, i put it in slot 24 which was empty and they worked perfect, no problems, plus i grounded the wire and they work with the highbeams now! yay!
Thread
Thread Starter
Forum
Replies
Last Post