Yellow 1994 Integra
#181
07-01-2017, 05:40 AM
Join Date: Dec 2008
Location: Chesapeake, VA. -USA
Posts: 4,429
#183
07-04-2017, 11:41 PM
Join Date: Dec 2008
Location: Chesapeake, VA. -USA
Posts: 4,429
#189
07-08-2017, 09:21 PM
Join Date: Dec 2008
Location: Chesapeake, VA. -USA
Posts: 4,429
4am thru 9am bumper for Jeep Patriot from the shipping box to clear coat : ^ )
Next weekend detail extior and replace damaged bumper and install this one.
Last edited by Perrenoud Fit; 07-08-2017 at 11:12 PM.
#191
07-13-2017, 08:45 PM
Join Date: Dec 2008
Location: Chesapeake, VA. -USA
Posts: 4,429
O2 Replaced
The tip was getting carbon around it. So I ordered a Denso sensor from Rock Auto for my engine. It got here today and was installed after I got home from work. The first little jaunt seemed to have a bit better throttle response, meh.
My wife talked me into going to Bruster's for a qt. of sea salt Carmel ice cream, it was a very short conversation.
Drove bb down the hiway about 8 miles and got off and noticed even better throttle response. So hopefully as the carbon deposits burn off it'll get even better. : ^ )
I'll also check the mpg as it should get better also.
Winner, winner chicken dinner!
My wife talked me into going to Bruster's for a qt. of sea salt Carmel ice cream, it was a very short conversation.
Drove bb down the hiway about 8 miles and got off and noticed even better throttle response. So hopefully as the carbon deposits burn off it'll get even better. : ^ )
I'll also check the mpg as it should get better also.
Winner, winner chicken dinner!
Last edited by Perrenoud Fit; 07-13-2017 at 08:51 PM.
#192
07-14-2017, 08:43 PM
Join Date: Dec 2008
Location: Chesapeake, VA. -USA
Posts: 4,429
Drove her to work today and she was,
Better than yesterday! So far no carbon and a bit quicker.
: ^ )
Right on!
: ^ )
Right on!
Last edited by Perrenoud Fit; 07-14-2017 at 08:52 PM.
#193
07-15-2017, 10:26 PM
Join Date: Dec 2008
Location: Chesapeake, VA. -USA
Posts: 4,429
Finished up a little project today...
Install the bits from the old bumper.
Almost done here..
Last edited by Perrenoud Fit; 07-23-2017 at 10:17 PM.
#194
07-15-2017, 10:37 PM
Join Date: Dec 2008
Location: Chesapeake, VA. -USA
Posts: 4,429
Drove Big Bird to the strip tonight, well almost. Came down to Artic and thought this is too busy tonight
for me and turned around and crusied back. But what I really wanted to do is see if the mpg was going up. 132 was last week for almost 1/2 a tank. Tonight I was 125 @ 3/8 of a tank. I know it's not as accurate as when. I fill up and do the math,but it's alot better. And no hesitation when called on.
It's the best 28.00 I've spent in a long time, bos!
for me and turned around and crusied back. But what I really wanted to do is see if the mpg was going up. 132 was last week for almost 1/2 a tank. Tonight I was 125 @ 3/8 of a tank. I know it's not as accurate as when. I fill up and do the math,but it's alot better. And no hesitation when called on.
It's the best 28.00 I've spent in a long time, bos!
Last edited by Perrenoud Fit; 07-23-2017 at 10:18 PM.
#195
07-17-2017, 08:29 PM
Join Date: Dec 2008
Location: Chesapeake, VA. -USA
Posts: 4,429
Changing the PVC don't do it!!!
OMW what bad material the PVC is in. After the rubber fitting gets baked for 23 years it shrinks and turns brittle. This makes getting the plastic PVC out impossible. O well now I have a new valve and housing,
OMW what bad material the PVC is in. After the rubber fitting gets baked for 23 years it shrinks and turns brittle. This makes getting the plastic PVC out impossible. O well now I have a new valve and housing,
Last edited by Perrenoud Fit; 07-17-2017 at 08:59 PM.
#196
07-20-2017, 08:27 PM
Join Date: Dec 2008
Location: Chesapeake, VA. -USA
Posts: 4,429
Installed the new PVC housing and valve. Had to remove the IM bracket to get to the hose in the catch can. Was it fun, no. but it's done and done right. So it's all good!!
#198
07-21-2017, 11:36 PM
Join Date: Dec 2008
Location: Chesapeake, VA. -USA
Posts: 4,429
#199
07-22-2017, 12:43 AM
Join Date: Dec 2008
Location: Chesapeake, VA. -USA
Posts: 4,429
#200
07-22-2017, 12:44 AM
Join Date: Dec 2008
Location: Chesapeake, VA. -USA
Posts: 4,429
