Fit Engine Modifications, Motor Swaps, ECU Tuning Reference Library for Engine Modifications, Swaps and Tuning

HKS Turbo kit

Thread Tools
 
Search this Thread
 
  #161  
Old 08-04-2008, 12:39 PM
JDMchris.com's Avatar
I run THIS
5 Year Member
iTrader: (5)
Join Date: Apr 2006
Location: Riverside
Posts: 12,411
Originally Posted by chaseerry
If installed, is their a need for new gauges (boost, temp, etc.)?
I would definitely recomend it with this kit. Everyone I have talked to that has it says it runs very Hot. So I would run the gauges so you can keep tabs on everything.
 
  #162  
Old 08-04-2008, 12:56 PM
gd3kamiwanaB's Avatar
Luvs Dah b00st!
iTrader: (1)
Join Date: Oct 2007
Location: Orlando, FL
Posts: 1,253
with the f-con the kit comes with you can see temp air flow timing throttle% ect.. all you need is some sort of video screen like a head unit or something all it is a video out sorce with and RCA
 
  #163  
Old 08-05-2008, 03:12 PM
eldaino's Avatar
Member
5 Year Member
iTrader: (1)
Join Date: May 2007
Location: North Carolina
Posts: 2,705
Originally Posted by I Am Ray.
8th gen? *LAUGHS!!* Those things are doodo
yeah thats 8th gen. i'd hardly call them crap though dude!

better than the ep3.

faster than the 98-00 si for sure.

where is the reason for the doodo?
 
  #164  
Old 08-05-2008, 07:06 PM
JDMish's Avatar
Member
iTrader: (1)
Join Date: Jul 2006
Location: Calgary
Posts: 654
Just finished reading this thread and a lot of good info. This has swayed our decision into using the HKS kit for our daily driver. Adam, good luck with your T1R install. Call me if you need a hand on Sunday.
 
  #165  
Old 08-12-2008, 01:33 AM
1990hondahf's Avatar
Member
Join Date: Jan 2008
Location: Florida
Posts: 250
I might have missed if this has been asked but.....how many PSI is the F-CON tuned for MAX? I know the kit, and therefore, the wastegate, is set for 5.7ish....but what if you up'ed it with a MBC....how high can you go?
 
  #166  
Old 08-12-2008, 01:55 AM
Kyle is raaddd's Avatar
Master FitFaker. CHEA!
Join Date: Mar 2008
Location: Marble Falls, TX
Posts: 5,317
Originally Posted by I Am Ray.
8th gen? *LAUGHS!!* Those things are doodo
hater!
 
  #167  
Old 08-14-2008, 01:15 PM
GD3-Fit's Avatar
I <3 SPOON
5 Year Member
iTrader: (2)
Join Date: Sep 2007
Location: Limerick, PA
Posts: 1,928
i remember a while ago everyone was freakin out because the new ctr was beating s2000s in tsukuba circuit
then they teamed two tuned s2ks against the ctr and put it in it's rightful place

if i were to get one it would have to be a FD2 conversion

-Ricky
 
  #168  
Old 08-14-2008, 01:43 PM
Kyle is raaddd's Avatar
Master FitFaker. CHEA!
Join Date: Mar 2008
Location: Marble Falls, TX
Posts: 5,317
haha yeah i can't see a civic type r beating s2000's...

i remember there was that white Si with the FD2 conversion,..
seriously, that is like one of my DREAM cars
i love the headlights and taillights
i would give anything for a CTR
 
  #169  
Old 08-14-2008, 03:16 PM
GD3-Fit's Avatar
I <3 SPOON
5 Year Member
iTrader: (2)
Join Date: Sep 2007
Location: Limerick, PA
Posts: 1,928
here's proof...

CTR vs S2000
YouTube - 2007 Honda Civic Type R vs. Honda S2000

CTR vs NSX, S2000, DC5 Type R, 350Z
YouTube - new civic type r tsukuba battle

CTR getting demolished by Seeker S2000 and J's Racing S2000
http://www.youtube.com/watch?v=pwNCtjrioKw

-Ricky
 
  #170  
Old 08-14-2008, 06:15 PM
Raaaaaaaaaay.'s Avatar
Posts in the NUUDE
Retired Moderator
iTrader: (11)
Join Date: Aug 2006
Location: Orlando, FL
Posts: 8,956
Originally Posted by eldaino
yeah thats 8th gen. i'd hardly call them crap though dude!

better than the ep3.

faster than the 98-00 si for sure.

where is the reason for the doodo?
I just dont like them. Theyre slow and made in Canada.
Way better than the Ep3... thats for sure. Ep3's look nicer though.
 
  #171  
Old 08-14-2008, 06:45 PM
YeeFit's Avatar
Member
Thread Starter
iTrader: (1)
Join Date: Apr 2007
Location: Calgary, Canada
Posts: 1,110
Originally Posted by I Am Ray.
I just dont like them. Theyre slow and made in Canada.
Way better than the Ep3... thats for sure. Ep3's look nicer though.
Not so sure why you think its so bad that they are made in Canada.. what's your issue? Would you prefer to have your car to be made in Mexico? or even better Taiwan?

I sometimes question the view that Americans have on us Canadians. We don't say "Aboot", its ABOUT, we don't live in igloos (alteast not all of us ), we actually have summer (so be it only 2-3 months out the year if we are lucky..), and we don't look anything like the Canadians on South Park!

Here's a good quote from a famous villian "We aren't so different you and I"...

Can u guess who it is?
 

Last edited by YeeFit; 08-14-2008 at 06:50 PM.
  #172  
Old 08-14-2008, 06:50 PM
Raaaaaaaaaay.'s Avatar
Posts in the NUUDE
Retired Moderator
iTrader: (11)
Join Date: Aug 2006
Location: Orlando, FL
Posts: 8,956
No.... I just dont like the car. It being built in the US/Canada is just icing for me.
The main reason why I dont like them is that theyre slow.

Im done talking about the Si. I just dont like the car.
 
  #173  
Old 08-14-2008, 08:08 PM
Kyle is raaddd's Avatar
Master FitFaker. CHEA!
Join Date: Mar 2008
Location: Marble Falls, TX
Posts: 5,317
ray loves the si
he's lying
and they look SO much better than the EP3
 
  #174  
Old 08-14-2008, 08:11 PM
Raaaaaaaaaay.'s Avatar
Posts in the NUUDE
Retired Moderator
iTrader: (11)
Join Date: Aug 2006
Location: Orlando, FL
Posts: 8,956
Whateva whateva. The Ep3 looks like a Fit. Id take an Ep3 over an Si. Id relocate that dumb shifter though. Hehh

And honestly, theyre just as slow.
 
  #175  
Old 08-15-2008, 09:27 AM
GD3-Fit's Avatar
I <3 SPOON
5 Year Member
iTrader: (2)
Join Date: Sep 2007
Location: Limerick, PA
Posts: 1,928
he's just mad because the EP3 and FA5 can smoke his Fit :P
 
  #176  
Old 08-15-2008, 01:55 PM
eldaino's Avatar
Member
5 Year Member
iTrader: (1)
Join Date: May 2007
Location: North Carolina
Posts: 2,705
Originally Posted by I Am Ray.
Whateva whateva. The Ep3 looks like a Fit. Id take an Ep3 over an Si. Id relocate that dumb shifter though. Hehh

And honestly, theyre just as slow.

i like the shifter. ralley style fo sho.

but do you mean that the ep3 is as fast as an fd2 si?

nah man. new si's are one second to 1.5 seconds faster, even driven hard.

i still don't think its THAT big of a deal, i'm just being technical. I'm trying to adhere to a standard: GAFIT got on my case in another thread when i said the m/t fit's 1-1.5 second advantage in acceleration was no big deal, but apparently it is.

anywho, i'm feelin ya ray. I love the way ep3's look, but as far as what the US was given to deal with, the new si is superior.

However, the ep3 type r is another beast, and i'd take that badboy in a heart beat.

Ray do you mind the fact that the ep3 is made in england?
 
  #177  
Old 08-15-2008, 01:55 PM
eldaino's Avatar
Member
5 Year Member
iTrader: (1)
Join Date: May 2007
Location: North Carolina
Posts: 2,705
Originally Posted by kyle.
haha yeah i can't see a civic type r beating s2000's...

i remember there was that white Si with the FD2 conversion,..
seriously, that is like one of my DREAM cars
i love the headlights and taillights
i would give anything for a CTR


yes, the ctr can own an s2k. As gd3 posted, it takes a modified s2k to trounce it
 
  #178  
Old 08-16-2008, 01:35 AM
abscooter's Avatar
Member
iTrader: (4)
Join Date: Mar 2008
Location: Tampa Florida
Posts: 195
I know the post has gone off topic alittle, but just wanted to post my Dyno chart

I think the HKS Turbo is a great kit and with a bit of turning I could get about 10/15 more HP. But the car is what it is, and the only way this car would be fast is to no longer have the L15 motor. To spend 13 to 15k to get 250 at the wheels with a K swap boosted doesn't sound right. But thats my OP.


 
  #179  
Old 08-17-2008, 02:34 PM
eldaino's Avatar
Member
5 Year Member
iTrader: (1)
Join Date: May 2007
Location: North Carolina
Posts: 2,705
awesome numbers man! and i totally agree with your statment: soup your fit up to make it more enjoyable to YOU and to suprise a few folks, but not to decimate everyone.

be swift, not fast.
 
  #180  
Old 08-17-2008, 06:55 PM
Raaaaaaaaaay.'s Avatar
Posts in the NUUDE
Retired Moderator
iTrader: (11)
Join Date: Aug 2006
Location: Orlando, FL
Posts: 8,956
Originally Posted by GD3-Fit
he's just mad because the EP3 and FA5 can smoke his Fit :P
I was dead even with a FA5 until 3rd in my Fit. I had an intake and an muffler back then.
That was the day I hated them more.
 


Quick Reply: HKS Turbo kit



All times are GMT -4. The time now is 06:13 PM.