LED tailights, install, convert, DIYs
#65
Now i think about it...
Go with clear and stick a piece of those smoked laminx sheet or something.
Go for the stealth look!
Flatblack headlights
Black rims
Tint (lowest you can go)
Smoked tails
Oh.. and slam it too!
That will look kinda sweet!
Go with clear and stick a piece of those smoked laminx sheet or something.
Go for the stealth look!
Flatblack headlights
Black rims
Tint (lowest you can go)
Smoked tails
Oh.. and slam it too!
That will look kinda sweet!
#67
LED Tail Lights?
First post.... Woot woot.... What kinda prices is everyone getting for their LED taillights? My mugen visors are on the way and i think i need just a few more things to complete my madness for exterior, and taillights are one of them...... Hit me up.
#74
If you do a search for "tail lights" and also "bumper" "brake lights", you will come across these three threads:
https://www.fitfreak.net/forums/show...ht=tail+lights
https://www.fitfreak.net/forums/show...ht=tail+lights
https://www.fitfreak.net/forums/show...+lights+bumper
My thread is the second one. These should be enough to help you install the tail lights. I recommend removing the bumper since it will really help make the removal and installation of the tail lights easier.
Just start to do it and you will realize what you need to do. It's not too difficult. It just takes time.
https://www.fitfreak.net/forums/show...ht=tail+lights
https://www.fitfreak.net/forums/show...ht=tail+lights
https://www.fitfreak.net/forums/show...+lights+bumper
My thread is the second one. These should be enough to help you install the tail lights. I recommend removing the bumper since it will really help make the removal and installation of the tail lights easier.
Just start to do it and you will realize what you need to do. It's not too difficult. It just takes time.
#76
I have installed the LED Taillight by following the instructions in the above thread. After the installation, I realized there is a gap between the LED taillight and the rear bumper. Is it normal? I noticed that the insert in under the taillight on the LED tailight is longer than the USDM oem taillight. I think it is the reason for the gap. I am wonder if I can a replica LED tailight housing. Can anyone who has the geniune LED taillight verify it? I don't have the 'honda' letter on the back of the housing. is it normal?