$2000 + Fit Mod Club!
#201
I'm at $2,705 to date for mods...
Rays 57 Motorsport G07WT
Nitto Neogen 215/40/17
Project Kics Caliber 24 Heptagon
Espelir Super Active Down
Cusco Vacanza Front Tower Bar
Napolex Broadway 270mm Blue Mirror
EXEA EX-45 Plate Adjuster
Honda Access M/T Sport Pedals
OEM Honda Plate Garnish
I just bought my GE6 last March 16, 2009.
Rays 57 Motorsport G07WT
Nitto Neogen 215/40/17
Project Kics Caliber 24 Heptagon
Espelir Super Active Down
Cusco Vacanza Front Tower Bar
Napolex Broadway 270mm Blue Mirror
EXEA EX-45 Plate Adjuster
Honda Access M/T Sport Pedals
OEM Honda Plate Garnish
I just bought my GE6 last March 16, 2009.
#202
Take Two of Me & Don't Call in the Morning
iTrader: (15)
Join Date: Jul 2008
Location: Chicago, IL
Posts: 1,316
I think I'm in this club at least 2 times over. I could be wrong
Tanabe front strut bar
Weapon R intake manifold
DIY intake
T1R B-Max carbon fiber intake
Last Station powerbox intake
Megan b pipe
Megan muffler
JDM center console
Mugen short shifter
Team voodoo countersunk shift knob
Skunk2 Springs
Progress rear sway
Helios HID PnP kit
JDM Badges all around
PW:JDM License plate relocate
Rear badgeless garnish
iKONA grille
Mugen style rear trunk/bumper garnish
Cusco Oil catch tank
Soon I'll be getting the tanabe rear strut bar and a c-pillar bar. After that it's wheels/tires and a wideband. Then I think I'll finally be done for a while LOL
Tanabe front strut bar
Weapon R intake manifold
DIY intake
T1R B-Max carbon fiber intake
Last Station powerbox intake
Megan b pipe
Megan muffler
JDM center console
Mugen short shifter
Team voodoo countersunk shift knob
Skunk2 Springs
Progress rear sway
Helios HID PnP kit
JDM Badges all around
PW:JDM License plate relocate
Rear badgeless garnish
iKONA grille
Mugen style rear trunk/bumper garnish
Cusco Oil catch tank
Soon I'll be getting the tanabe rear strut bar and a c-pillar bar. After that it's wheels/tires and a wideband. Then I think I'll finally be done for a while LOL
Last edited by DrKelso; 04-29-2009 at 02:39 PM.
#205
$2050 - Painted Authentic Ings+1 N-Spec Body Kit (#1 of 7 made) including custom fabricated license plate spot delete
$0400 - Painted Upper and Lower Rear Garnishes
$0400 - NBP Headlights
$0385 - T1R B-Max CF Intake
$0250 - Powdercoated OEM Sport Alloys
$0200 - 40/20% Diamond Tint
$0160 - Zeta Wide Molding
$0100 - Smoked JDM-Style LED Taillights
$0060 - GE8 Blue Stitch Select Knob
$0050 - Zeta Dead Pedal
--------------------------------------------
$4055 - Total
SHIT!!!!!
$0400 - Painted Upper and Lower Rear Garnishes
$0400 - NBP Headlights
$0385 - T1R B-Max CF Intake
$0250 - Powdercoated OEM Sport Alloys
$0200 - 40/20% Diamond Tint
$0160 - Zeta Wide Molding
$0100 - Smoked JDM-Style LED Taillights
$0060 - GE8 Blue Stitch Select Knob
$0050 - Zeta Dead Pedal
--------------------------------------------
$4055 - Total
SHIT!!!!!
#208
This thread made me curious about how much I have spent on cars and I don't want to think how much I spent on my S2000 but my Fit so far.... Well, I got a long way to go!
Honda Fit.
T1R spring 196 shipped
Debit master card
Honda Fit.
T1R spring 196 shipped
Debit master card
Last edited by MugenAP2; 05-20-2009 at 11:59 PM.
#209
$3000.00+ in the last 2 months and a little over $500.00 since purchase up until then. ......It started with a cat back pipe with glass pack, AEM C.A.S. (that is no longer in use) and a few nick nacks here and there.... I got some 195-55 Conti Pro Contac tires mounted on Enkei RPK 7" wheels from Tire Rack, and Kraftwerks super charger, just recently.... Function is more important than form to me, but I think my car looks pretty good when ever I get around to washing it..... I do want to install some window vent visors (Mugen), but for functional reasons more than for looks, though I do think they look great on the cars that I have seen them on here on FitFreak.
#210
I have a friend with over $50 grand in his S2K, so many people pour $50k+ in S2K's it's INSANE, so I'm guessing you went all out like that too...?
#211
i dont know how much i spent... here's wat i have
mugen GT-R stickers.
jk. i think i made the $2K club, not sure. i have:
endura-tech coilovers
cusco stb
rota slips with ziex912's
daikei steering hub
momo steering wheel
type-r knob
mugen visors
metalized tint
deadpedal, all season floor mats
recaro child seats x2
megan axlefart
jvc hu with bezel
sti map light, etc.
and some other minor things.
mugen GT-R stickers.
jk. i think i made the $2K club, not sure. i have:
endura-tech coilovers
cusco stb
rota slips with ziex912's
daikei steering hub
momo steering wheel
type-r knob
mugen visors
metalized tint
deadpedal, all season floor mats
recaro child seats x2
megan axlefart
jvc hu with bezel
sti map light, etc.
and some other minor things.
Last edited by kenchan; 05-21-2009 at 02:58 PM. Reason: for got maplight...
#213
: wavey:
ok here i go.
engine- hks super intake
mugen oil cap, etc
suspension- tanabe "red" springs lol
GOT a J"S suspension on the way to US!!!!!!
-tanabe front lower tie bar
=J's stuff
-front strut bar
-rear strut bar
-floor bar
-c-pillar bar
-cross bars
-full J's titanium exhaust system
interior
authentic Discontinued SPOON titanium shift knob
exterior
mugen visor
wheels
volks RE30's, wrapped in yoko soft compound s-drives
w/ volk rays formula lug nuts
this set alone installed cost around 3000 or so.
damn. because i had the tire pressure sensor installed in the wheels.
many more to come!!!!!!!!!!!!!!!!!!!!!!!!!
stay tuned!!!!
i will be tuning with J's parts!
headers, cat delete pipe, throttle body, tow hooks, etc...!!!
ok here i go.
engine- hks super intake
mugen oil cap, etc
suspension- tanabe "red" springs lol
GOT a J"S suspension on the way to US!!!!!!
-tanabe front lower tie bar
=J's stuff
-front strut bar
-rear strut bar
-floor bar
-c-pillar bar
-cross bars
-full J's titanium exhaust system
interior
authentic Discontinued SPOON titanium shift knob
exterior
mugen visor
wheels
volks RE30's, wrapped in yoko soft compound s-drives
w/ volk rays formula lug nuts
this set alone installed cost around 3000 or so.
damn. because i had the tire pressure sensor installed in the wheels.
many more to come!!!!!!!!!!!!!!!!!!!!!!!!!
stay tuned!!!!
i will be tuning with J's parts!
headers, cat delete pipe, throttle body, tow hooks, etc...!!!
#214
Take Two of Me & Don't Call in the Morning
iTrader: (15)
Join Date: Jul 2008
Location: Chicago, IL
Posts: 1,316
I just sat down and tracked how much I've spent total (including minor supplies to achieve my mods)...
Grand Total: $4804
and I've got another $2k on the way by the end of the summer...coilovers, T1R strut bars + c-pillar, Wideband, FMU
Grand Total: $4804
and I've got another $2k on the way by the end of the summer...coilovers, T1R strut bars + c-pillar, Wideband, FMU
#217
I have always kind of chuckled at this thread, thinking "what kind of fool would spend that kind of money modding a Fit?" Well...
...I have met the fool, and he is me.
Since buying a second set of rims and tires (I plan to run a summer/winter set like I have been doing on my Subies) I have gone over the $2K mark. Quite a bit over it, as it turns out. Here's my list, roughly in the order I got them; I'm probably missing stuff:
Zeta dead pedal
JDM center console
Lighting: aux high beams, bulbs, map light
Beatrush front underpanel (used)
H-Fit short shifter
Mugen short shifter (used)
Circuit Hero shift lever extender
T1R header (used)
T1R midpipe (used)
SHG_Mike replica intake (used)
Mugen RnR wheels (used)
Zeta hood deflector
McGard lugs
Michelin Pilot Exalto PE2 tires
...I have met the fool, and he is me.
Since buying a second set of rims and tires (I plan to run a summer/winter set like I have been doing on my Subies) I have gone over the $2K mark. Quite a bit over it, as it turns out. Here's my list, roughly in the order I got them; I'm probably missing stuff:
Zeta dead pedal
JDM center console
Lighting: aux high beams, bulbs, map light
Beatrush front underpanel (used)
H-Fit short shifter
Mugen short shifter (used)
Circuit Hero shift lever extender
T1R header (used)
T1R midpipe (used)
SHG_Mike replica intake (used)
Mugen RnR wheels (used)
Zeta hood deflector
McGard lugs
Michelin Pilot Exalto PE2 tires
#219
My last two purchases were just over four grand and would have been more if I had shelled out for someone else to turn a wrench..... I crawled under it and saved about five hundred or maybe more and know that the job was done right.... If something goes wrong, I know I can fix it myself.