Daddy's New Toy :D 1990 EF Hatch
#61
#65
Thanks everyone for your kind remarks!
It's a slower process now that the temps are higher. But coming along nicely. :D
https://www.fitfreak.net/forums/pict...pictureid=7756
It's a slower process now that the temps are higher. But coming along nicely. :D
https://www.fitfreak.net/forums/pict...pictureid=7756
Last edited by Perrenoud Fit; 07-11-2013 at 01:21 PM.
#66
Finished the last wheel well today now it's the 18mm sway bar install, then back to rewiring. Friday night was removing a dent in the P.S. front fender with a dolly, hammer, pick and a 1x4. Painless Dent Removal :-).
slowly but shirley " x " step x step...
https://www.fitfreak.net/forums/pict...pictureid=7773
slowly but shirley " x " step x step...
https://www.fitfreak.net/forums/pict...pictureid=7773
Last edited by Perrenoud Fit; 07-15-2013 at 06:45 PM.
#67
gIVE mE a bRAKE!
https://www.fitfreak.net/forums/pict...pictureid=7774
https://www.fitfreak.net/forums/pict...pictureid=7779
SO we finished up the rear brakes and the llllast wheel well this weekend. and to celebrate... installed a 18mm sway B (see pic above oops!)
I really liked the texture and finish of these right outa the box. So i shot 3 coats of low luster clear on them to help the rust stay away. The red p.c. drums where just too over the top (hahahahahahahah) for me.
https://www.fitfreak.net/forums/pict...pictureid=7753
https://www.fitfreak.net/forums/pict...pictureid=7779
SO we finished up the rear brakes and the llllast wheel well this weekend. and to celebrate... installed a 18mm sway B (see pic above oops!)
I really liked the texture and finish of these right outa the box. So i shot 3 coats of low luster clear on them to help the rust stay away. The red p.c. drums where just too over the top (hahahahahahahah) for me.
https://www.fitfreak.net/forums/pict...pictureid=7753
Last edited by Perrenoud Fit; 07-16-2013 at 10:09 PM.
#68
#70
Looking for parts has become a real challenge with somethings, like the moldings that go at the bottom of the windows on the doors. The ones that came w/ the car are crack/split and the s.s. is showing. but after diligent hours of looking/ or just dumb luck? I found old OEM stock L & R sides! Vtec S2 cover and 40 S2 under the hood fasteners coming in red and silver w/ allen screws. Slowly but surly coming along. A new steering rack, hubs and front calipers (red powder coated) are in the shop waiting to be installed :D. new steering, 18mm sway bar, new brakes, and hubs all around will only add to the fun.
#73
haha
Last edited by Perrenoud Fit; 09-07-2013 at 11:34 PM.
#74
Thanks and O' hell Ya!
Shooot ya, show n go mo-sheen! =O)
Last edited by Perrenoud Fit; 09-07-2013 at 11:33 PM.
#75
Not sure if im really feeling the Lambo doors on an EF. EF's are great little cars, easy to work on. An 89 was about the first car I owned. Amazing little car. Car looks good, body looks excellent, but I still would have to pass up on the doors.
#77
I'm taking notes... LOL!
#78
#80
The little Details
I've been looking for a "real" B16 starter for a few months now. I bought one from A.Z. but was about 1/2 the size of the OEM.
Got this one off Ebay from a low mileage motor, as you can see it was clean to begin with.
The wiper motor assembly was off a CRX down the road at a local bone yard.
Took em both apart cleaned and of course had to paint them, lol ( if you follow my posts then ya know, I'll paint you if sit there too long :) b4 assembling them. So here they are ;o)
Before:
https://www.fitfreak.net/forums/pict...pictureid=8014
After:
https://www.fitfreak.net/forums/pict...pictureid=8015
Got this one off Ebay from a low mileage motor, as you can see it was clean to begin with.
The wiper motor assembly was off a CRX down the road at a local bone yard.
Took em both apart cleaned and of course had to paint them, lol ( if you follow my posts then ya know, I'll paint you if sit there too long :) b4 assembling them. So here they are ;o)
Before:
https://www.fitfreak.net/forums/pict...pictureid=8014
After:
https://www.fitfreak.net/forums/pict...pictureid=8015
Last edited by Perrenoud Fit; 07-14-2014 at 01:40 PM.