Fit Engine Modifications, Motor Swaps, ECU Tuning Reference Library for Engine Modifications, Swaps and Tuning

KraftWerks Supercharger Kits

Thread Tools
 
Search this Thread
 
Old Feb 22, 2008 | 05:52 PM
  #401  
eldaino's Avatar
Member
5 Year Member
iTrader: (1)
Joined: May 2007
Posts: 2,705
From: North Carolina
Originally Posted by xorbe
Yes, it would be nice if they could lay out a few setups and whp dynos. I'd probably go for the middle one. I don't really want to mess with the exhaust system at this time.

basic
#5 kit

basic+1
#5 kit
these injectors
that header

basic+2
#5 kit
these injectors
that header
that down pipe
this exhaust
i like the idea of the middle one too, but according to what kraftwerks has told us, the added injectors and header combo with out the exhaust to match would result in a lot of power lost on the table, and improper back pressure.

i think that if you didn't want to mess with the exhaust, a simple axle back and the charger would make more sense then the injectors/header combo.

i just understand it as, "if you are going to go all out, go all out, because its a waste otherwise."
 
Old Feb 23, 2008 | 09:47 PM
  #402  
Midnightfit's Avatar
Member
5 Year Member
iTrader: (1)
Joined: Feb 2008
Posts: 102
From: Hagerstown,M.D
high boost question

Im new to this forum but not to the tuning world, Im going to buy this kit for sure, but with the high boost kit and the hondata reflash does it still use the supercard. Because if it doesn't then i can fine tune with a afc neo, which is a good thing since each engine isn't the same even in stock forum.
 
Old Feb 23, 2008 | 09:51 PM
  #403  
JDMchris.com's Avatar
I run THIS
iTrader: (5)
Joined: Apr 2006
Posts: 12,411
From: Riverside
5 Year Member
highboost kit uses Hondata only
 
Old Feb 23, 2008 | 10:08 PM
  #404  
Midnightfit's Avatar
Member
5 Year Member
iTrader: (1)
Joined: Feb 2008
Posts: 102
From: Hagerstown,M.D
intercooler upgrade

Will the intercooler upgrade be a front mount and if so do you have to lose your fog lights
 
Old Feb 24, 2008 | 02:16 AM
  #405  
CuTeBoi's Avatar
Member
5 Year Member
iTrader: (1)
Joined: Apr 2007
Posts: 1,346
From: San Antonio, TX, USA
I subscribed through the KW's website and I haven't gotten an update, yet I'm hearing/seeing info about the MT SC already being on pre-order?

grr, wish there wasn't so much info on this thread, it's growing so quickly too.
 
Old Feb 24, 2008 | 04:19 AM
  #406  
xorbe's Avatar
Member
iTrader: (1)
Joined: May 2006
Posts: 1,082
From: Bay Area, CA USA
5 Year Member
Originally Posted by eldaino
i like the idea of the middle one too, but according to what kraftwerks has told us, the added injectors and header combo with out the exhaust to match would result in a lot of power lost on the table, and improper back pressure.

i think that if you didn't want to mess with the exhaust, a simple axle back and the charger would make more sense then the injectors/header combo.

i just understand it as, "if you are going to go all out, go all out, because its a waste otherwise."
Right, what I mean is, lay out options 1, 2, 3 for starters, half-way, all-out. Yeah, I'm not the expert out what those should be as you can see, that's why I want them to lay it out for me.
 
Old Feb 24, 2008 | 12:09 PM
  #407  
JDMchris.com's Avatar
I run THIS
iTrader: (5)
Joined: Apr 2006
Posts: 12,411
From: Riverside
5 Year Member
Originally Posted by CuTeBoi
I subscribed through the KW's website and I haven't gotten an update, yet I'm hearing/seeing info about the MT SC already being on pre-order?

grr, wish there wasn't so much info on this thread, it's growing so quickly too.
This thread was consolidated from the huge one. ALL THE GOOD INFO U NEED TO KNOW IS HERE. Just read through it.
 
Old Feb 25, 2008 | 11:50 AM
  #408  
eldaino's Avatar
Member
5 Year Member
iTrader: (1)
Joined: May 2007
Posts: 2,705
From: North Carolina
Originally Posted by xorbe
Right, what I mean is, lay out options 1, 2, 3 for starters, half-way, all-out. Yeah, I'm not the expert out what those should be as you can see, that's why I want them to lay it out for me.

oh i hear ya man! i think that thats what they plan on doing, a base man, a base auto, a base man with exhaust and injectors, a base auto with exhaust and injectors.


i've personally started to re-evaluate when exactly im getting this kit...as 4k is also a great amount of money to put towards the principle of your car.
 
Old Feb 25, 2008 | 11:55 PM
  #409  
diedwater's Avatar
Member
5 Year Member
Joined: Oct 2007
Posts: 278
From: Wichita, KS, US
I know that the 10lb kit will come with a hondata reflash, so...say if I have a AFC Neo hooked up, will it be useless when I get the kit? or, will I be able to tune on top of the hondata reflash?
 
Old Feb 26, 2008 | 10:58 AM
  #410  
eldaino's Avatar
Member
5 Year Member
iTrader: (1)
Joined: May 2007
Posts: 2,705
From: North Carolina
bump for interest, and dyno updates.
 
Old Feb 26, 2008 | 01:04 PM
  #411  
ToyotaLover's Avatar
Member
5 Year Member
iTrader: (3)
Joined: Sep 2007
Posts: 688
From: Orange County, CA
Originally Posted by eldaino
bump for interest, and dyno updates.
screw that...have it released already so people can do their own dyno runs...:P

maybe if we ask less questions they'll have it out sooner... we can only hope.
 
Old Feb 26, 2008 | 01:52 PM
  #412  
REXXXXXXXXX's Avatar
Frequent FitFreak Poster
Joined: Sep 2007
Posts: 805
From: N Jersey
yo for real. when those dyno #s comin out? i need my daily dose of kraftwerks to keep me goin lol...
 
Old Feb 26, 2008 | 03:00 PM
  #413  
eldaino's Avatar
Member
5 Year Member
iTrader: (1)
Joined: May 2007
Posts: 2,705
From: North Carolina
Originally Posted by REXXXXXXXXX
yo for real. when those dyno #s comin out? i need my daily dose of kraftwerks to keep me goin lol...

ha ha! i know what you mean! +2
 
Old Feb 26, 2008 | 03:01 PM
  #414  
eldaino's Avatar
Member
5 Year Member
iTrader: (1)
Joined: May 2007
Posts: 2,705
From: North Carolina
Originally Posted by ToyotaLover
screw that...have it released already so people can do their own dyno runs...:P

maybe if we ask less questions they'll have it out sooner... we can only hope.


yeah, maybe they got sick of all the repeat questions. (hence the existence of this updated thread.)
 
Old Feb 26, 2008 | 03:08 PM
  #415  
JDMchris.com's Avatar
I run THIS
iTrader: (5)
Joined: Apr 2006
Posts: 12,411
From: Riverside
5 Year Member
Originally Posted by eldaino
yeah, maybe they got sick of all the repeat questions. (hence the existence of this updated thread.)
Nope, Just busy finishing the kits to get out to you guys
 
Old Feb 26, 2008 | 03:13 PM
  #416  
SickFit's Avatar
Member
5 Year Member
iTrader: (1)
Joined: Dec 2007
Posts: 965
From: Florida
Yay!!!!
 
Old Feb 26, 2008 | 03:14 PM
  #417  
bschook5's Avatar
Member
5 Year Member
Joined: Dec 2007
Posts: 116
From: Royse City, TX
Cant wait to get mine in!!!!
 
Old Feb 26, 2008 | 03:17 PM
  #418  
SickFit's Avatar
Member
5 Year Member
iTrader: (1)
Joined: Dec 2007
Posts: 965
From: Florida
I'm actually waiting for the high boost
 
Old Feb 26, 2008 | 03:27 PM
  #419  
Zangoose GD3 Blue's Avatar
Member
5 Year Member
iTrader: (2)
Joined: Aug 2007
Posts: 2,873
From: New York LONG ISLAND
Originally Posted by SickFit
I'm actually waiting for the high boost
yeah i was waiting for the high boost but i change my mind on the K series swap instead
 
Old Feb 26, 2008 | 03:43 PM
  #420  
eldaino's Avatar
Member
5 Year Member
iTrader: (1)
Joined: May 2007
Posts: 2,705
From: North Carolina
Originally Posted by JDMchris.com
Nope, Just busy finishing the kits to get out to you guys


yay!!! awesome, thats always a good reason.
 



All times are GMT -4. The time now is 01:49 PM.