Damn Rooster got me up early. Maybe be some fried chicken tonight.

 

You're meaning 'fried rooster' brother.

The Rooster Song
1. Had a hen wouldn’t lay eggs
Had a hen wouldn’t lay eggs
Till the rooster came on the farm
Met that hen behind the barn
Now we have eggs now
Yes we have eggs now
Since that rooster came on the farm
Now we have eggs now
Yes we have eggs now
Since that rooster came on the farm

2. Had a dog wouldn’t have no pups
Had a dog wouldn’t have no pups
Till the rooster came on the farm
Met my dog behind the barn.
Now we have bird dogs
Yes we have bird dogs
Since the rooster came on the farm
Now we have bird dogs
Yes we have bird dogs
Since the rooster came on the farm

3. Had a cow wouldn’t give no milk
Had a cow wouldn’t give no milk
Till the rooster came on the farm
Met my cow behind the barn
Now we have eggnog
Yes we have eggnog
Since the rooster came on the farm
Now we have eggnog
Yes we have eggnog
Since the rooster came on the farm

4. Had an aunt wouldn’t have no kids
Had an aunt wouldn’t have no kids
Till the rooster came on the farm
Met my aunt behind the barn
We’re havin’ fried rooster
We’re havin’ fried rooster
Since my aunt came on the farm
We’re havin’ fried rooster
We’re havin’ fried rooster
Since my aunt came on the farm

 

OK Adele gave me this info. "there is a clip at the top of the pedal to squeeze while yolu pull up.

It is at the top of the plastic plug piece near the wires. it took me like 20 min to get it off the first time because it's on tight. But after you get it off, it'll be easy to do if you ever need to again."

I tried. Damn it is tight. Has to be the first time. I may just take the three nuts off holding the whole assembly then have a bit of room to use both hands.

The first time is always the hardest eh?

 

Hey Auntie What's For Dinner?...... What the... is this bird doing?.......Bukgaak ....Fried Chicken!!

RIP LOL

 

you guys are so helpful - lol

I got lots of chicken recipes but no help on that damn plug.
Where I have arrow is that what I squeeze? On both sides?

 

yes and its a pain in the ass to remove so be patient

 

Funny how this was never mentioned before. I am hoping the rain starts soon so I can practice patience.

 

Squeeze at the top by the wires...see where the yellow dot is...up further but toward the center

 

Now if women only came with the spot marked eh?

Oh I am beginning to love the person who forced me to buy this.

 

Aw c'mon it's not that hard!

You just gotta squeeze and pull up. If you weren't such a goober and tied your winker lights to your lower dash, you could get in there better.

 

"Goober", a slang term referring to the low intellectual level of an individual,

I need help obviously.

 

This is now beyond fun.

I got it off!! Then on the section with the two ends you are suppose to put in there. Female end goes over the male end on pedal part OK but the Male end in no way will fit into the other end. The black casing is just too big to fit into the female end of harness.

I even tried on that section to see if they would fit themselve and nope.

Pawson did you want to jump in here? There is a tag on the end that is too big that says 7A. I got a feeling I may have the wrong one? That item number is also on the packageing for that specific cable. Is it the one for a GE?


Help, In meantime will put the plug back in grrrrrrr

 

It'll fit, it's just a little tight. You also have to make sure you plug it in the right way or you'll get no power to the LCD (which happened to me the first time).

 

7a is correct. It is tight so keep trying.

 

OK, I just noticed something different on my trip to the beer store. At what I'm presuming is full throttle, on the SP7 setting, it goes to A35 and then A30 on the display. Is this normal?

 

Yes...that's the percentage of throttle opening

 

ooooo, fun. just pluged mine in and set it up. took it for a test drive and played with the modes and settings while driving. in sp7 mode the car feels like its supposed to feel finely. you know, fun and sporty. great product, and cheap. good mod

 

Dumb question but is it supposed to show 100 percent for WOT?

 

Mine doesn't always show correct readings of throttle opening % in the SP modes either but the other settings appear to read correctly....

 

I tried just plugging the pice into each other and I see if you squeeze the long sides it will slip in. I will give it another try today. Once installed I will likely be back for info on calibration