Thread: DIY lower your GE8 Fit
View Single Post
  #42 (permalink)  
Old 11-03-2008, 10:47 AM
niko3257's Avatar
niko3257 niko3257 is online now
FitFreak GE8 DIY Guy
iTrader: (2)
  
Join Date: Aug 2008
Location: Palm Coast FLA
Posts: 1,627
Rep Power: 42949675
niko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to liveniko3257 relies on Rep Points to live
Quote:
Originally Posted by OrangeRevolution View Post
Ah, my mistake regarding your bumpstops/pictures. Any measurements of bumpstops or pieces of bumpstops would be useful, for example, if you said 1" and that was about 40% of total. Museum-grade write-up.


i cut off 1.5 inches off both front and back.
__________________

2009 SSM AT
2003 MX5

DIY Cargo Light
http://www.fitfreak.net/forums/2nd-g...t-upgrade.html
DIY Fit Lowered
http://www.fitfreak.net/forums/2nd-g...r-ge8-fit.html
DIY Turn Signal Mirrors (Winkers)
http://www.fitfreak.net/forums/2nd-g...s-winkers.html

Reply With Quote