What did you do to your GE fit today?
Member
Joined: Jul 2015
Posts: 305
From: DR
Thank you!
I fell in love with 6000k, ordered a pair for my foglights.
easy way to check if your blinding oncoming traffic is see if the cutoff line ends below their side view mirrors. my driver's side was slanted clockwise for a while and u can definitely see it shining on their faces, especially on the lanes furthest on the left side towards the opposite shoulder.
Yup I have 6000k on my foglights as well 
I also have 3000K stashed somewhere before I changed em up;
The first time I retrofitted I had come from hid's in my headlights so initially my projectors were pointed really low lol-- but yea I asjudted mine so that at about 20ft my cutoff was no higher than the top of an average car's bumper; I saw this online somewhere and liked it because I didn't want to be like those bimmers that look like they're highbeaming someone whenever they're going through bumpy roads and such hahah.
I also have 3000K stashed somewhere before I changed em up;easy way to check if your blinding oncoming traffic is see if the cutoff line ends below their side view mirrors. my driver's side was slanted clockwise for a while and u can definitely see it shining on their faces, especially on the lanes furthest on the left side towards the opposite shoulder.
It's been a productive week. Done alot of stuff to the fit, that's been on my check list.
Mugen mats I got from Chino. Blue vinyl on the upper glove box. Still have to do the radio trim.
Ghetto Vinyl eyebrows and finished the driver's side black vinyl.
Rewired my lighting wires and moved them all inside the engine bay since they tend to die off and needed to be removed often to get replaced (love morimoto, but goddamn their halos and drivers die every minute, thank god their warranty is good). The harness died off again and i replaced it with the new one i received from the other harness that died a couple of months ago. Now I have to warranty another harness/driver.
As you can see the passenger side Morimoto XB LED fog is dead/dying. it is very dim compared to the driver's side. At one point when I was driving around admiring my cutoff, i hit a bump and the fog went to full power, however it went back to dim when i got home. So i have to warranty another Morimoto part.
Also did vinyl on the radiator cover.
Changed out the interior led lights since one of the map lights wont turn on anymore. Replaced them with the cheapest custom cut leds i can find from China. There were manufacturing excess burrs from where they cut it and wasnt smoothed out so i had file them down to fit. otherwise they look great. lets see how long they last.
Finally finished the recaro red door fabrics. So much easier than the initial plan of overlaying real carbon fiber fabric on them. Will need to look at the driver's side panel again since the bottom corner is popping out, I rushed the glue part so it didnt adhere completely.
Replaced my old cusco decals with 3d cusco decals and a Philippine flag.
Mugen mats I got from Chino. Blue vinyl on the upper glove box. Still have to do the radio trim.
Ghetto Vinyl eyebrows and finished the driver's side black vinyl.
Rewired my lighting wires and moved them all inside the engine bay since they tend to die off and needed to be removed often to get replaced (love morimoto, but goddamn their halos and drivers die every minute, thank god their warranty is good). The harness died off again and i replaced it with the new one i received from the other harness that died a couple of months ago. Now I have to warranty another harness/driver.
As you can see the passenger side Morimoto XB LED fog is dead/dying. it is very dim compared to the driver's side. At one point when I was driving around admiring my cutoff, i hit a bump and the fog went to full power, however it went back to dim when i got home. So i have to warranty another Morimoto part.
Also did vinyl on the radiator cover.
Changed out the interior led lights since one of the map lights wont turn on anymore. Replaced them with the cheapest custom cut leds i can find from China. There were manufacturing excess burrs from where they cut it and wasnt smoothed out so i had file them down to fit. otherwise they look great. lets see how long they last.
Finally finished the recaro red door fabrics. So much easier than the initial plan of overlaying real carbon fiber fabric on them. Will need to look at the driver's side panel again since the bottom corner is popping out, I rushed the glue part so it didnt adhere completely.
Replaced my old cusco decals with 3d cusco decals and a Philippine flag.
Member
Joined: Jul 2015
Posts: 305
From: DR
Radiator fan starting to sound funny, thinking of replacing it... will this one do: ?
https://www.amazon.com/TYC-601210-Re...%3Ahonda%3Afit
https://www.amazon.com/TYC-601210-Re...%3Ahonda%3Afit
Member
Joined: Jul 2015
Posts: 305
From: DR
Got a bunch of stuff on the mail .. but first, took advantage of a local deal for a set of HANKOOK 205/55/15 tires. These should be similiar in terms of height to the Sport OEM wheel+tire combo.
Last edited by cajlog; Jun 21, 2016 at 02:02 PM.
