What did you do to your GK Fit today?
New Member
Joined: Nov 2014
Posts: 9
From: Colorado
What tow hook are you using? And how did you get the si emblem to stick in the front that looks sick!
Member
Joined: Jun 2015
Posts: 28
From: Charleston, SC
I found the si emblem on eBay it has two bolts for grill mounting instead of 3m tape! The tow hook is koncorde or something like that. Not impressed with the finish on the Neo chrome.
Member
Joined: May 2008
Posts: 110
From: Port Jervis, NY
Chitownfit rides again! :-)
Just bought a manual GK . This is my 3rd Fit and I have to say, holy extras Bat Man! There is so much stuff in and on this car that it'll take me weeks to learn it! Already I want to put a side exit exhaust and a custom intake cause, well, that's just how I roll!
Member
Joined: Jun 2015
Posts: 28
From: Charleston, SC
Im making it my version of an Si. If there was a Fit Si I would have bought one. But there isnt so I am making my own. You can ask many many questions all day long. Like why would you put an octopus on the side of your fit? Why would you put carbon fiber vinyl on your hood? etc.
Member
Joined: Apr 2015
Posts: 563
From: Northern VA
Im making it my version of an Si. If there was a Fit Si I would have bought one. But there isnt so I am making my own. You can ask many many questions all day long. Like why would you put an octopus on the side of your fit? Why would you put carbon fiber vinyl on your hood? etc.
Im making it my version of an Si. If there was a Fit Si I would have bought one. But there isnt so I am making my own. You can ask many many questions all day long. Like why would you put an octopus on the side of your fit? Why would you put carbon fiber vinyl on your hood? etc.
Member
Joined: Oct 2014
Posts: 53
From: Minnesota
Today I made custom window inserts with Reflectix material for all the windows in my Fit! (blocks light) I'm taking it on a month long road trip and plan on sleeping a few of the nights in the Fit (or want to be able to, anyway). I'll post a thread about it later. :-)
Member
Joined: Jan 2015
Posts: 96
From: CA
Installed Swift sport lowering springs on my EX-6MT. Not the GE springs either, I mean the latest GK set with a 1" drop. Will follow up by this weekend with a more thorough review in the suspension section of this forum. Best mod I could've made to my 6-month-old.
Thread Starter
|
Member
Joined: Jan 2015
Posts: 367
From: Doraville
Installed Swift sport lowering springs on my EX-6MT. Not the GE springs either, I mean the latest GK set with a 1" drop. Will follow up by this weekend with a more thorough review in the suspension section of this forum. Best mod I could've made to my 6-month-old.
Member
Joined: Jun 2015
Posts: 28
From: Charleston, SC
It was pretty easy... It's still a project in the making. I completely removed the spoiler then put extended bolts in the center two bolts holes. I think my next step is putting adjustable splitter stansions on the outer bolt holes to give it tilt adjustment and a little bit more stability.
New Member
Joined: Nov 2014
Posts: 9
From: Colorado
It was pretty easy... It's still a project in the making. I completely removed the spoiler then put extended bolts in the center two bolts holes. I think my next step is putting adjustable splitter stansions on the outer bolt holes to give it tilt adjustment and a little bit more stability.
New Member
Joined: Jun 2015
Posts: 3
From: Minnesota
Set the tire pressure to the correct amount.
After 30 days of ownership the tire pressure warning light came on. I checked while cold, all were at 37 and so I lowered each to 32. That sure smoothed out the ride. I though I once heard you should always check the pressure on a new car because the dealerships tend to put in too much.
After 30 days of ownership the tire pressure warning light came on. I checked while cold, all were at 37 and so I lowered each to 32. That sure smoothed out the ride. I though I once heard you should always check the pressure on a new car because the dealerships tend to put in too much.