Thread: Scan gauge schooling
View Single Post
  #291 (permalink)  
Old 12-21-2008, 06:13 PM
Syco54645 Syco54645 is offline
Member
iTrader: (3)
  
Join Date: May 2008
Location: Johnstown, PA
Posts: 178
Rep Power: 55
Syco54645 should get some awardsSyco54645 should get some awardsSyco54645 should get some awardsSyco54645 should get some awardsSyco54645 should get some awardsSyco54645 should get some awardsSyco54645 should get some awardsSyco54645 should get some awardsSyco54645 should get some awardsSyco54645 should get some awardsSyco54645 should get some awards
Send a message via AIM to Syco54645 Send a message via Yahoo to Syco54645
Quote:
Originally Posted by MINI-Fit View Post
If you drive and coast then without much throttle you will tend to get 9999 miles/gallon easily on instant not trip. Then once you hit the throttle a little the 9999 changes to about 80 to 220 for me depending on whether you are going downhill or on the flat.

My scan gauge gets stuck on 9999 and even with some throttle it stays there a little too long. My response is a bit sluggish but I dont' use it for accurate numbers just relative monitoring.
This was when i was just driving with my foot on the gas...
I did a use defaults last night and got it working now.
Averaged 33mpg today with some hiway and city driving. Alot of stop and go and a ton of hill. The fit hates hills.
This is an at btw.
Reply With Quote