You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Yeah it is the LM2 full kit, not the "basic kit"... which is good because if any CEL's pop up we can at scan them.
I wonder how hard the RPM wiring is? Apparently it can make a chart of RPM's VS A/F ratio's that you can download to the computer. Could be useful when tweaking the greddy map.
It was really weird, I was fully expecting Crowfoot Muffler to be open.. and Speedy should have been open on Saturday until 5:00, it even says so on the door.
Maybe call them Monday to see whats up and confirm they can take you this Saturday so everything goes smooth Sunday
__________________
2008 VBP Fit LX M/T
3m clearbra
Keyless entry
Sport Spoiler
Zeta dead pedal
JDM centre console w/ armrest
Man, all the responces from muffler shops today have been piss poor except for Crowfoot Muffler. I guess I will try to book it down to Crowfoot after work today... at rush hour... in the snow
I think my favorite was either Midas or Speedy
Midas: Hello Me: Can you guys install a weld in bung on a header for me this afternoon? Midas: Well a weld in bung eh, that could take a couple of hours to install Me: But it is a header that is a loose part I will bring in, it has never been installed and is totally clean. Midas: But you know, cutting the whole and depending on where it gets installed it could be tricky... at least an hour or two worth of labour. Me: um ok... never mind
Speedy: Hello how can I help you Me: Hi, can you guys install a weld in bung for me on a new uninstalled header? Speedy: Sorry we don't install supplied parts Me: Well they are both loose parts, but you guys could supply the bung... Speedy: *Click*
__________________
For a jolt of pure awesome... just click the sugarphreak button!
So where should I tell them to install this thing? I can't get too close to the O2 sensor because the cell elliminator attachment could stick over top of it.
Should I look at having it put in upstream of the resonator?
__________________
For a jolt of pure awesome... just click the sugarphreak button!
Last edited by Sugarphreak; 02-23-2009 at 04:48 PM.
do it on one of the 2 collectors. in front of the flew looks too far away.
i was told to install it between 14-18 inches down stream of the head.
If you're turbo'd then you'll want it much further FYI. more like 36" downstream or else you'll burn out the sensor prematurely.
Just make sure it has clearance and is at the proper angle... it'd be best to install it and then have the bung installed to make sure you'll have room to actually install the sensor in and have clearance for it under the car.
i was refering to the 14-18 inches for the n/a guys.
ya, i think you should have the bung placed infront on the flex part after the 2-1 collector.. should have enough room there.
Will you not need an O2 fix piece since this header removes the cat? you'll throw a CEL if the OEM O2 sensor is just installed without a O2 fix piece. Or does this header not replace the cat?
ya, i think you should have the bung placed infront on the flex part after the 2-1 collector.. should have enough room there.
Will you not need an O2 fix piece since this header removes the cat? you'll throw a CEL if the OEM O2 sensor is just installed without a O2 fix piece. Or does this header not replace the cat?
header replaces the cat and comes with an 02 fix should be golden!
__________________
2008 VBP Fit LX M/T
3m clearbra
Keyless entry
Sport Spoiler
Zeta dead pedal
JDM centre console w/ armrest
Anybody replaced their wiper blades since they bought the car? Mine have been pretty good for the last two years, but I am thinking about picking up a new OEM set from Honda for the spring. Approx Cost?
__________________
For a jolt of pure awesome... just click the sugarphreak button!
sigh... my car is really noisy now Everybody keeps thinking I am trying to race them... but no, I am just accelerating.
crappy man... is that due to the cat delete? Mine isn't bad at all, but I may be just used to it... but i did hear that non-turbo'd cars with a cat-delete are pretty loud..
crappy man... is that due to the cat delete? Mine isn't bad at all, but I may be just used to it... but i did hear that non-turbo'd cars with a cat-delete are pretty loud..
A turbo acts as a muffler so turbo cars would be much quieter even without a resonator and a bigger diameter exhaust.
__________________
2008 VBP Fit LX M/T
3m clearbra
Keyless entry
Sport Spoiler
Zeta dead pedal
JDM centre console w/ armrest
Linear Mode
