3rd Generation (2015+) Say hello to the newest member of the Fit family. 3rd Generation specific talk and questions here.

MODS/ACCESSORIES for the GK

Thread Tools
 
Search this Thread
 
Old Sep 17, 2014 | 10:22 PM
  #441  
13fit's Avatar
Member
Joined: Dec 2012
Posts: 1,911
From: Ft.Hood TX // LaCrosse WI
I cannot comment, I dont own any coilovers to put a firm opinion. I have simply noticed some people on here not being happy with the life of their Megan coilovers.

D2 and Ksport are the same coilovers, so research doubles on them. Function and Form Type II's seem to be a great budget coilover.

research is key of course.


No swaybars and it was better? EG/DC2 chassis were similar across 4dr and hatch models. Slight rigidity difference, but strengths were similar. biggest issue I ever had with any 88-2000 civic/integra was rear subframe tearout. Too stiff of suspension without proper bracing or seam welding meant that rear subframe was crying for mercy around every corner
 
Old Sep 17, 2014 | 10:53 PM
  #442  
Gina*Baby's Avatar
Member
Joined: Sep 2014
Posts: 47
From: Los Angeles, CA
5 Year Member
Originally Posted by 13fit
I cannot comment, I dont own any coilovers to put a firm opinion. I have simply noticed some people on here not being happy with the life of their Megan coilovers.

D2 and Ksport are the same coilovers, so research doubles on them. Function and Form Type II's seem to be a great budget coilover.

research is key of course.


No swaybars and it was better? EG/DC2 chassis were similar across 4dr and hatch models. Slight rigidity difference, but strengths were similar. biggest issue I ever had with any 88-2000 civic/integra was rear subframe tearout. Too stiff of suspension without proper bracing or seam welding meant that rear subframe was crying for mercy around every corner
IDK. I had the GSR for about 10 years and it wasn't until after they came out (forcefully on their own), did I notice a bigger difference. But in a positive light. Where it would push out before, I could hold grip after. I hate double laning the canyons and without them, it made it a lot easier to stay in a single lane, even in some of the worst conditions, like Mt. Wilson or Latigo (if you're from Los Angeles). The most I would get was some subtle pushing in the front, but with a little camber in the front and toe in the back, it would correct faster. But that may have also just been due to my driving style. My best friend had bigger sway bars in the front and the back and we were pretty equal on the road; he had a 2dr fully built GSR.
 
Old Sep 23, 2014 | 11:58 PM
  #443  
Darkshowdo's Avatar
Member
Joined: Sep 2014
Posts: 72
From: US
Anyone found a set of metal replacement Pedals for a 6MT?
I saw some on ebay for an auto but a manual set would be great.

I had them on my BMW and i feel like they make a great difference to way it feels. Also anyone found a shift knob that is slightly higher then stock, weighted, and fits correctly?
 
Old Sep 24, 2014 | 01:19 PM
  #444  
Fat_man's Avatar
Member
Joined: Aug 2014
Posts: 112
From: Omaha, NE
Originally Posted by JediPat
I actually ordered a 2014 JDM fit/jazz Mugen brochure...I will share it with you guys when it comes in. Those will be some mods worth ordering.
Has this shown up yet? I would love to see it! Is there an electronic version?
 
Old Sep 24, 2014 | 01:30 PM
  #445  
luismycorreo's Avatar
Member
iTrader: (1)
Joined: Oct 2013
Posts: 225
From: Montreal, Canada
5 Year Member
Originally Posted by Fat_man
Has this shown up yet? I would love to see it! Is there an electronic version?
Take a look on this post

what-mods-accessories-your-new-gk-11 by luismycorreo

Luis
Honda Fit Sport 2013 - Vortex Blue Pearl
 
Old Sep 24, 2014 | 01:52 PM
  #446  
bbigmouthh's Avatar
Member
Joined: Aug 2014
Posts: 49
From: Chicago
I got Tein S Tech

Name:  1TUXLAV.jpg
Views: 464
Size:  460.7 KB



Name:  5OWQUNr.jpg
Views: 462
Size:  405.3 KB
 

Last edited by bbigmouthh; Sep 28, 2014 at 02:13 PM.
Old Sep 24, 2014 | 03:07 PM
  #447  
ArchaicAP2's Avatar
Member
Joined: Aug 2014
Posts: 97
From: San Diego
Looks perfect. I wonder how long your shocks will last being on the softer spring.
 
Old Sep 26, 2014 | 05:48 PM
  #448  
15BlkPrl's Avatar
Member
Joined: Aug 2014
Posts: 321
From: Md
Originally Posted by nicco
spaghetina I will try to remember to post back here when I take off the dip. I actually used the Duplicolor version as it is easily available here.

I thought the black might get lost in with the dark grey but it looks great on a red gk:



https://www.facebook.com/27346121502...type=1&theater

I also got a tin of red to see how it sits with the grey too.

What are u using to lower your Fit?? Also which yr/model emblem is that one for?? It would be helpful for those who want to do that mod....
 
Old Sep 26, 2014 | 05:49 PM
  #449  
15BlkPrl's Avatar
Member
Joined: Aug 2014
Posts: 321
From: Md
Name:  imagejpg1_zps7c38a3a1.jpg
Views: 2334
Size:  62.5 KB
It's like Christmas.....

Name:  imagejpg2_zps79d957d0.jpg
Views: 2350
Size:  76.5 KB
Very well packaged

Name:  imagejpg3_zpsd5e46031.jpg
Views: 2323
Size:  72.7 KB
U boxed and complete. Quality looks good. I lit all the emblems using a 12 v battery charger they all work well. Just from looking at them I say they are a good buy. Test fit looked good.
Tech will install/wire them up tomorrow... I do not mess with electrical....
 
Old Sep 26, 2014 | 07:35 PM
  #450  
nicco's Avatar
Member
Joined: Jun 2014
Posts: 78
From: Brisbane, Australia
Originally Posted by 15BlkPrl
What are u using to lower your Fit?? Also which yr/model emblem is that one for?? It would be helpful for those who want to do that mod....
Hi, that is not my Fit but if you go to JDM Select on Facebook, they have the red H emblems for the GK now. They are in the Phillipines but have quoted to paint and post a Mugen copy body kit to Australia. It is the lower lip spoiler and side skirt seen in the pic.
 
Old Sep 28, 2014 | 12:06 AM
  #451  
ROTTBOY's Avatar
Thread Starter
|
Someone that spends his life on FitFreak.net
Joined: Mar 2014
Posts: 1,116
From: Hawaii: relocated to Western Canada Sept, 2015
Active Again

Wow, has there been a lot of activity since I last came to this site. You guys with the super cool looking lowering, wheel spacers, interior lighting etc..........
Definitely devilizing the rest of our GK community.
Here is my plain jane LX.
Name:  2015HondaFitSept262014FrontLeft.jpg
Views: 2423
Size:  84.4 KB
Started to install all my accessories (listed in the 1st post on this thread). So far have done a Blox Shifter knob.

Name:  2015HONDAFITBloxshifter9-27-14.jpg
Views: 2406
Size:  84.2 KB

Got a leather steering wheel cover (Wheelskins - made in the USA) for me and my neighbor (EX-CVT) and helped him this afternoon do the install. Mfg. says an hour. Its more like 2 hours + and that was two of us. Not perfect but definitely feels like the real thing. Can't go wrong for $50. Do not get the ones they sell for the GE. Its slightly bigger and won't have the exact fit. I measure mine and made the Special Order. Its 14 1/4" and 3 7/8".
Name:  2015HONDAFITWheelskinleatherSteeringwheelcover9-27-14.jpg
Views: 2390
Size:  100.2 KBName:  2015HONDAFITWheelskinBox9-27-14.jpg
Views: 2312
Size:  77.9 KB

Still have a ton of stuff to install. Next will be painting the calipers (red), installing the caliper Honda sticker, 16" alloys, rear JDM upper tail-lights. Won't happen tomorrow - its NFL Sunday.
BTW, has anyone here taken out the OEM stereo H/U??? Anyone install amps or the like??? The only place I can find for my audio stuff in under the two front seats. Any tips would be great.

Did a short 50 mile jaunt just to see what kind of mileage I could get with the manual. Was able to squeeze 46 MPG doing 60 mph (60% hwy and 40% city - no A/C) and watching that eco green light. Pretty pleased with those results. Will post what I finally get after my first fill-up.

So nice to be back!!!!!!!!
 

Last edited by ROTTBOY; Sep 28, 2014 at 12:20 AM.
Old Sep 28, 2014 | 08:36 AM
  #452  
tmfit's Avatar
Member
Joined: May 2014
Posts: 852
From: St Paris, Ohio
5 Year Member
Welcome back Rott! Good to see you and great to see you now have the new toy! She looks great, can't wait to see her when your finished.
 
Old Sep 28, 2014 | 10:31 AM
  #453  
cheesewhiz's Avatar
Member
Joined: Jul 2014
Posts: 254
From: Massachusetts
5 Year Member
Rottboy!!!!!!

Rottboy!!!! Welcome back! You are finally having a Hawaiian FIT! Looks SWEET and CLEAN!

I think there IS some info in this thread from folks who have upgraded the stereo system, not sure if they replaced it entirely (this thread has gotten HUGE)

Yes there certainly has been a lot of activity ... YOUR thread has gone viral ... tons of good info contained within.

You're gonna have a blast with your upgrades/mods. Make sure to post pics of your progress!

 
Old Sep 28, 2014 | 05:41 PM
  #454  
ROTTBOY's Avatar
Thread Starter
|
Someone that spends his life on FitFreak.net
Joined: Mar 2014
Posts: 1,116
From: Hawaii: relocated to Western Canada Sept, 2015
Tmfit/Cheezwhiz, certainly nice to be back. Still learning a lot from the guys who have posted since my FF break in July. Lowering really makes the ride look super cool. Congrats to bbmouthh - what a great job!!!! My bad luck as the driveway entrance is just too steep to allow for lowering.

Woke up early today before kick-off and installed the following. My Fit is beginning to look a bit too busy. One thing for sure, if you guys ever see my ride parked on the island, you'll know its mine for sure!!!!
- Installed the rear bumper applique, emblem red stick-on and the i-VTEC placque. Will tackle the JDM upper LED lights on Tuesday onwards.
Name:  2015HondaFitREARREDEmblemAppliqueI-vtecSept282014.jpg
Views: 2591
Size:  156.4 KB

- Interior LED lights. Used flat rectangular LED strips (EBAY) as I find them brighter with a softer effect than LED bulbs. They are slightly pricier.
Name:  2015HondaFitFrontOverheadLEDlightSept282014.jpg
Views: 2292
Size:  94.5 KBName:  2015HondaFitCenterOverheadLEDSept282014.jpg
Views: 2361
Size:  91.5 KBName:  2015HondaFitTrunkLEDSept282014.jpg
Views: 2338
Size:  151.1 KBName:  LEDLights.jpg
Views: 2339
Size:  64.3 KB

- Front Red Badge Sticker
Name:  2015HondaFitFrontREDEmblemSept282014.jpg
Views: 2508
Size:  75.2 KB

- Steering Wheel Red Badge StickerName:  2015HondaFitSteeringWheelREDEmblemSept282014.jpg
Views: 2394
Size:  131.2 KB

That's it for today. Back to football!!!
 
Old Sep 28, 2014 | 06:21 PM
  #455  
15BlkPrl's Avatar
Member
Joined: Aug 2014
Posts: 321
From: Md
Name:  imagejpg1_zps92f4f97a.jpg
Views: 2721
Size:  112.1 KB
Just got them on....
 
Old Sep 28, 2014 | 06:34 PM
  #456  
ROTTBOY's Avatar
Thread Starter
|
Someone that spends his life on FitFreak.net
Joined: Mar 2014
Posts: 1,116
From: Hawaii: relocated to Western Canada Sept, 2015
Originally Posted by 15BlkPrl
........................Just got them on....
Damn, what can I say but, it looks great!!! Matches perfect with the tinting too!!!
 
Old Sep 28, 2014 | 06:45 PM
  #457  
15BlkPrl's Avatar
Member
Joined: Aug 2014
Posts: 321
From: Md
Originally Posted by ROTTBOY
Damn, what can I say but, it looks great!!! Matches perfect with the tinting too!!!
Thanks man. I got really lucky with these wheels. Was under my nose for a while.
Got them from my parts dept and one of my techs had a set of Rays lug nuts taken off a trade in... Very happy with the look just have to clean them
 
Old Sep 28, 2014 | 06:51 PM
  #458  
bbigmouthh's Avatar
Member
Joined: Aug 2014
Posts: 49
From: Chicago
Originally Posted by 15BlkPrl

Just got them on....
Damn !! Look nice gona b my next upgrade.
 
Old Sep 28, 2014 | 06:55 PM
  #459  
xStitchx's Avatar
Member
Joined: Jun 2014
Posts: 135
From: Boston MA
Welcome back, Rottboy! You were missed. Your LX is looking awesome Surely there will be more mods to come ...
 
Old Sep 28, 2014 | 07:06 PM
  #460  
ROTTBOY's Avatar
Thread Starter
|
Someone that spends his life on FitFreak.net
Joined: Mar 2014
Posts: 1,116
From: Hawaii: relocated to Western Canada Sept, 2015
Originally Posted by xStitchx
Welcome back, Rottboy! .....Surely there will be more mods to come ...
XStitchX, thanks for the welcome back.

This week will work installing and wiring on those LED upper rear taillights, mount the park assist sensors, paint and sticker the calipers, then install the alloys. For sure to continue posting pics as the developement progresses.

Am doing all the easy stuff first.

The part that will take time is sound deadening and stereo upgrade. Its driving me nuts finding a secure place for the components.
 



All times are GMT -4. The time now is 04:36 AM.