K20 Fit How To Discussion - Page 13

Hocker · #**241** (**permalink**) 12-12-2007, 04:03 PM

Quote:

Originally Posted by gettinafit

The Check engine light is on because the fit computer is looking for the DBW Pedal and motorized assisted TB. As you know I'm using cable throttle. When I plug in the DBW pedal and TB, the light goes out. I need to do that when I have to run the car for a plug in Inspection. But other than that I will prob pull the bulb. THe Fit Cluster Ck Eng. Light is for reading the Fit ECU only.
I have a seperate LED for the Kpro CK Eng. Lit.

Shouldn't Doug at Hondata be able to have the ECU not look for those things?

gettinafit · #**242** (**permalink**) 12-12-2007, 05:01 PM

Quote:

Originally Posted by Hocker

Shouldn't Doug at Hondata be able to have the ECU not look for those things?

This is correct, and the kit Someone buys won't have a Ck Eng. Lt!

Mine was a prototype. I'm not sending my ecu back, I just got the car up and running and I'm just going to pull the bulb! I only care about the Kpro Ck Eng Lt LED. That is off!

gettinafit · #**243** (**permalink**) 12-18-2007, 09:00 AM

**UPDATE!**

Hasport Header is HERE!!!!

I still need to get it ceramic coated, but it's here!!!

TWO piece 4-2-1 Race Header (Cat-delete Down Pipe)

I will post Pics of it ceramic coated and and possibly cromed out....!

Wave · #**244** (**permalink**) 12-18-2007, 09:05 AM

Now that looks sooooooooo much better than the home brew header you posted.

I suggest Jet-Hot for ceramic coating but I'm biased, they did my J's Racing Header.

Zangoose GD3 Blue · #**245** (**permalink**) 12-18-2007, 09:09 AM

oh boy NYC K20 FIT = BADDASSS lol... cant wait to see thing on the road... come to think of it it looks long will you have clearance when going over speed bump ?

gettinafit · #**246** (**permalink**) 12-18-2007, 09:10 AM

Quote:

Originally Posted by Wave

Now that looks sooooooooo much better than the home brew header you posted.

I suggest Jet-Hot for ceramic coating but I'm biased, they did my J's Racing Header.

Yeah, it should perform 1000X's better than what I've got on there now!

Hocker · #**247** (**permalink**) 12-18-2007, 11:53 AM

Looks good let us know how it turns out.

gettinafit · #**248** (**permalink**) 12-21-2007, 10:36 AM

Quote:

Originally Posted by Hocker

Looks good let us know how it turns out.

Thanks, just waiting it's return again..... One minute I have it next minute its gone again.... At least I know it's comming back when Jet-Hot says it is!

gettinafit · #**249** (**permalink**) 12-26-2007, 09:13 PM

Fujitsubo Powergetter! Cat Back (Second hand) ON my Fit, Courtesy of "Wave". Very quiet, but has much less restriction than stock! Once I have the race header on there it should be perfect!

Also I have raised my car back to stock height, safer for now until progress comes out with their street coilovers for the Kswaped Fit.

Other than that, still waiting on my header to come back coated....

Wave · #**250** (**permalink**) 12-26-2007, 09:28 PM

I'm very excited to see your car running on the roads!

Quote:

Originally Posted by gettinafit

Fujitsubo Powergetter! Cat Back (Second hand) ON my Fit, Courtesy of "Wave". Very quiet, but has much less restriction than stock! Once I have the race header on there it should be perfect!

Also I have raised my car back to stock height, safer for now until progress comes out with their street coilovers for the Kswaped Fit.

Other than that, still waiting on my header to come back coated....

Zangoose GD3 Blue · #**251** (**permalink**) 12-27-2007, 12:23 AM

are you all going to be showing up this Friday for a couple of drinks with SY11580...

gettinafit · #**252** (**permalink**) 12-27-2007, 11:49 AM

Quote:

Originally Posted by Wave

I'm very excited to see your car running on the roads!

Yeah man, sorry my car was up in the air when you came by. I'll give you a ride next time.

As for this Friday, I don't think I can make it.

Wave · #**253** (**permalink**) 12-29-2007, 04:10 PM

Oh yeah, it's plenty fast after going for a quick ride today in Gettinafit's K20 car!

Get those brakes and suspension updated ASAP so I don't freak out so much in the passenger seat!

gettinafit · #**254** (**permalink**) 12-29-2007, 06:21 PM

Quote:

Originally Posted by Wave

Oh yeah, it's plenty fast after going for a quick ride today in Gettinafit's K20 car!

Get those brakes and suspension updated ASAP so I don't freak out so much in the passenger seat!

Tks, just waiting on Progress Auto's Coilovers! and Ksport's Rear disc!

k20eg6 · #**255** (**permalink**) 01-08-2008, 11:38 PM

how much is the header going to run

gettinafit · #**256** (**permalink**) 01-09-2008, 09:11 AM

**Update**

The Header is Back from Jet-Hot coatings! Looks nice, and most importantly it's protected from the elements!

CHeck it out and check out the Difference in restriction with my old home made! And You can FEEL the difference!

Wave · #**257** (**permalink**) 01-09-2008, 10:52 AM

OMG! I can't wait to get back from Las Vegas to go for a ride on the OPEN HIGHWAY with that.

And you'll get your PBA cards as soon as I get them. I have this feeling you're really going to need them this year!

gettinafit · #**258** (**permalink**) 01-09-2008, 11:02 AM

Quote:

Originally Posted by Wave

OMG! I can't wait to get back from Las Vegas to go for a ride on the OPEN HIGHWAY with that.

And you'll get your PBA cards as soon as I get them. I have this feeling you're really going to need them this year!

Damn you are in Vegas AND on FitFreak! That takes dedication! hehe

It's 6:50 in the morning, just got in from a Night of gambling? Win anything!~

And tks on those pba's!

SpoonSportFit · #**259** (**permalink**) 01-10-2008, 02:12 AM

Coated header ftw!! haha am i smelling a new vid.? hopefully

? haha

ascGD3 · #**260** (**permalink**) 01-10-2008, 02:57 AM

GAHH sell me ur fit!!!