When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Back in AZ front plates were never required but out in TX it is so this is what I did today (nothing special).
I had to modify a bracket I got on line, used an aluminum flat stock and 2” screws so I don’t loose it. I should’ve painted the aluminum black, oh well.
Finally got a chance to install my Amazon oil catch can! I probably shouldn't have cheaped out so much, I ended having to buy a bunch of fittings to connect the tubing from 5/16ths to 3/8 in id.
2015 EX CVT, 40k miles
Last edited by Bornslacker; Jul 10, 2019 at 03:27 PM.
Reason: Add picture
Finally got a chance to install my Amazon oil catch can! I probably shouldn't have cheaped out so much, I ended having to buy a bunch of fittings to connect the tubing from 5/16ths to 3/8 in id.
2015 EX CVT, 40k miles
I got the Evil Energy one. The build quality is fine for the most part, not great, but gets the job done. The main structural parts and body feel solid. The filter is just two walls of plastic with holes punched. It screws in and out and actually came out when I checked it after ~400 miles. The fittings fit snugly, however there's a psuedo-washer on the dipstick that already came out of place and got squished into the threading. Not sure how that even happened!
I got the Evil Energy one. The build quality is fine for the most part, not great, but gets the job done. The main structural parts and body feel solid. The filter is just two walls of plastic with holes punched. It screws in and out and actually came out when I checked it after ~400 miles. The fittings fit snugly, however there's a psuedo-washer on the dipstick that already came out of place and got squished into the threading. Not sure how that even happened!
How do you drain it? Getting below it looks like it would be difficult.
There is a inside AND outside diameter to consider for the hoses. I ended up using this: HBD Thermoid NBR/PVC SAE30R7 Premium Fuel Line Hose, 3/8" X 25' Length, 0.375" ID, Black
Just finished installing Fortin EVO-ONE with the THAR-ONE-HON4 harness. I was on a roll once I got started so no pics. Once all the pre-work for the harness was cleaned up and done prior to install, it took about 20 minutes to do. Now I can remote start during the summer months in Texas.
Really happy with how this daily driver is coming along
The wheel are for sale for local pickup also in Orange County, CA $450 w/tires OBO just DM me. They are Beyen Mesh 15x7 +28 with TSW Center Caps
Amazon Nicol Sound Deadining Material Wheel Well undercoating Undercoating for the Rear End and Megan Sway Bar Megan Coilovers Drop Aliexpress matts actually fit AMAZING
How's the ride? I guess it's great with a full suspension kit like that!!! Btw it looks sick!!
finally decided to upgrade and get me a new 2019 GK5 Jazz
Good timing on the delivery I had my ruckus pinched sunday morning and my gen9 civic just isn't fun anymore.
A good friend runs the dealership its from, as a result im getting a bunch of stuff thrown at it at the moment
My goal is handling mostly we have some awesome windy roads through some remote parts of the countryside where handling is key and we have a few tracks for "play days"
The Kiwi RS Sport has a mugen body kit fitted from factory
mugen 17x7 wheels fitted with Potenza RE003
Mugen Sport coilover suspension pack (on a plane from japan)-20mm
there will be a tune some and there will be plenty more to come
exhaust will be coming it takes forever to get things down her so i might just make one
Delivery Day
Wow!! What a nice car!!! in which area do you live to be able to get one of these pearl?
