What did you do to your GE fit today?
A TSX... congrats... I guess?
~~~~~
Was bored, so I ordered a pair of (cheap) TYC foglights from Amazon for $153. One of the original has loose glass lens, the other is completely loose inner housing (the adjusting screws are completely rust stuck so I can't tighten anything down). I've known about it for a while and decided I would eventually replace them, but stuck with them in the meantime since they're an expensive purchase for foglights.
After my recent repair work last week, I noticed that one look very amber. Hint: neither the housing nor the bulb are amber.
I guess that time is OVER... It turns out there's water that has been sitting in there so long it changed color... yuck.
~~~~~
Was bored, so I ordered a pair of (cheap) TYC foglights from Amazon for $153. One of the original has loose glass lens, the other is completely loose inner housing (the adjusting screws are completely rust stuck so I can't tighten anything down). I've known about it for a while and decided I would eventually replace them, but stuck with them in the meantime since they're an expensive purchase for foglights.
After my recent repair work last week, I noticed that one look very amber. Hint: neither the housing nor the bulb are amber.
I guess that time is OVER... It turns out there's water that has been sitting in there so long it changed color... yuck.
Gonna change the oil in my 09 ge8 sport with Mobil1 full synthetic high mileage this weekend & replace the front sway bar links with new Moogs with greasable zerk fittings. Just hit 100k miles & my cars 10 years old now.
Front sway bar
I’m thinking of adding front sway bar next
The driver's side is bad so gonna replace both while I'm at it. Was around $17 per link so said eff it imma do both & be on the safe side.
Aftermarket companies might produce beefier front sway bars for the Fit, but that doesn't change the fact that there is already one on the Sport!
Might improve the handling, as would a drop, stiffer springs or better shocks.
Might improve the handling, as would a drop, stiffer springs or better shocks.
You mean replace the front sway bar with something thicker, yes? It's a real pain to remove/install; subframe has to be dropped about an inch or so.
Oh dang. I'm going to be running 15s in no time.
Just installed these taillights this weekend. I didn't get the memo and shaved the trunk, lost tons of hp. I'll have to start adding stickers to run with the big dogs.
Thanks @SeekerZero for the taillights! Super legit guy!
I left my turn signals in sequential mode.



and I am just now working on getting it fixed.